Wall fixation
Wall fixations are used to ensure the lateral stability of the mezzanine floor. If wall fixing is not possible, additional bracing elements must be used.
These are attached to the mezzanine beams and to the wall by means of suitable anchors, depending on the wall material.
Secondary Beam TS 4 / TS 8
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
Mezzanine |
Connector |
TS 4 / TS 8 |
Secondary Beam TL 30 / TL 35
The secondary beam consists of two inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
Mezzanine |
Connector |
TL 30 / TL 35 |
Primary Beam TXL 32
- Minimum length: 155cm, maximun length: 275cm
- Beam height: 10cm
Secondary Beam TXL 32 / TXL 37
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
Mezzanine |
Connector |
TXL 32 / TXL 37 |
Secondary Beam TM 15 / TL 20 / TL 23
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
Mezzanine |
Connector |
TM 15 |
|
TL 20 / TL 23 |
Opposite Primary Beam TL 30 / TL 20
The L Opposite Primary Beam consists of two exterior beams and one interior beam. It features every needed screw.
- Minimum length: 345cm, maximun length: 535cm
- Beam height: 30cm
Connector TL 30 / TL 35
Connector L, piece to attach the primary beam to the secondary beam.