* Good things are to be showed and that's why we share the photos sent to us by our customers. Please note that, in some cases, the elements may not match the exact combination of this product.
The Stability Bar XL is needed when the mezzanine cannot be fixed to 2 or more walls.
The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.
The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.
The K-bracing system (shown in the left) is as safe as the classic cross-bracing system. Moreover, our K- bracing system allows to pass freely underneath the mezzanine.
Warning: Last items in stock!
There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.
The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).
We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
** The products are suitable for indoors/outdoors considering certain recommendations.
|Type of product||Stability kits|
|Net weight (Kg)||8|
No hay preguntas de clientes por ahora.Add product questions