* Good things are to be showed and that's why we share the photos sent to us by our customers. Please note that, in some cases, the elements may not match the exact combination of this product.
The Stability Bar M is needed when the mezzanine cannot be fixed to 2 or more walls.
The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.
The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.
The K-bracing system (shown in the left) is as safe as the classic cross-bracing system. Moreover, our K- bracing system allows to pass freely underneath the mezzanine.
Warning: Last items in stock!
You can find an installer nearby on the web misterassembler.com.
This website is foreign to Tecrostar. It puts installers and customers in contact, so the price and the responsibility for the installation are the installer, not Tecrostar.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift. The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg). The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
** The products are suitable for indoors/outdoors considering certain recommendations.
|Type of product||Stability kits|
No hay preguntas de clientes por ahora.Add product questions
Bestens durchdacht und qualitativ top .