Industrial Mezzanine Kit TXL 32

Description

You can install the metal mezzanine TXL 32 yourself without construction works, and start using it instantly, as the full kit comes with all the accessories.

This pack includes:

Mezzanine TXL 32

XL Railing with safety skirting board

Standard Stairs XL

The flooring placed on the beams is formed by high-density structural boards 35 mm thick, P5 quality and waterproof. They have tongue and groove joints in their four sides so that there is not any failure or unevenness in the joints.

Our product is totally detachable and reusable. Therefore, it can be considered as movable property. This feature, always depending on each country’s current legislation, allows its use and installation with no need for planning permission.
The products can be located indoors and outdoors taking into account some recommendations.
Tecro Space S.L. no se responsabiliza del posible uso ni instalación inadecuada del producto.
There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of truck, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you think there is any kind of restriction, please contact us.
The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate).
We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.

Data sheet

Reference 13001-NA

Type of product: Full Kits
Range: Industrial XL
Compatibility: Extra Large, Large, Medium
Maximum height above the flooring board (cm) (HT): 381
Minimum height above the flooring board (cm) (HT): 235
Available heights above beams (cm) (HV): 371, 238, 244, 262, 268, 286, 292, 310, 317, 335, 341, 353, 365, 377, 232, 250, 256, 274, 280, 298, 304, 323, 329, 347, 359
Height-adjustable every (cm): 6,05
Total maximum load (Kg): 14651
Beam height (cm) (HB): 32,5
Maximum length of the primary beam (cm) (LT): 527
Minimum length of the primary beam (cm) (LT): 357
Maximum length of the secondary beam (cm) (DT): 556
Minimum length of the secondary beam (cm) (DT): 326
Maximum area (m²): 29,30
Minimum area (m²): 11,64
Load capacity in its minimum extension (kg/m²): 1200
Load capacity in its maximum extension (kg/m²): 500
Flooring (HF): High-density structural board, 35 mm thick, with P5 HYDRO quality. Waterproof and with tongue and groove joints in its four sides
Material and finish of the structure: Structural steel painted with powder coating

FAQs

General

Do I have technical support for my project?

Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.

Can someone come to measure or advise me?

We do not currently offer an on-site measurement service. However, we recommend you explore the Mr Assembler website, where you can find assemblers who do offer this service. In addition, their platform allows you to hire an assembly service for the products you need.

Can I install Tecrostar products outdoors?

Guide for outdoors

Waterproof treatment

Can I install a Tecrostar product making modifications of it?

You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.

Do I have to ask for a building permit or license to assemble my mezzanine?

No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.

The mezzanines with an industrial usage require neither a building license for their assembly nor meeting the maximum constructed surface limits of the pavillion. As they are removable and hence personal property, they are subject to the same legal regime as the machinery, the racks, the vehicles, etc.

Characteristics of the materials

Quality of the materials

Mezzanines

Which mezzanine is the right for me?

The key to choosing the right mezzanine is to be sure of how you will be using it.

If you want to use it at home, whether in a cosy bedroom, in a relaxing living room or in a garage to create extra space, you should consider the S or M ranges. The mezzanines of these ranges allow you to create a raised area between 160 cm and 182 cm high.

If you want to extend a commercial space, add a balcony to your garden or create a second storey warehouse or a large garage, we recommend the L mezzanines. From 209 cm to 343 cm high.

XL mezzanines are for larger projects. For example, you can fit out industrial premises or increase your company's productivity and storage capacity. These mezzanines range in height from 235 cm to 380 cm.

Once you know how you want to use your Tecrostar mezzanine, the next step is to fine-tune the details such as height, area and load capacity so that it fits your project perfectly. You can also add stairs, railings and other accessories.

Mezzanine ranges

More than one mezzanine suits my needs, which should I choose?

We might have various models of mezzanine that meet the dimensions you need. In this case, follow these criteria:

1- Load-bearing capacity

2- Maximum span (Distance between columns)

3- Beam height

4- Height of the mezzanine above the decking you need

I need more surface, what solutions are there?

You can increase the surface using the extension kits. Get these kits at the same time as your mezzanine or in the future, when you need more space.

These kits are height-adjustable as well and allow to multiply the surface of our mezzanine.

Is it a customised mezzanine? How does the Tecrostar system work?

No, it is not a customised mezzanine but its telescopic design enables an almost customised finish. This system is length, width and height adjustable, achieving the preferred measurements.

Tecrostar system

A: adjustable every 6 cm

B: adjustable every 10 cm

C: adjustable every 10 cm

Can I order a complete kit by changing its content?

In our shop, we offer two combinations: kits and packs.

In the case of the kits, you can choose the colour of the structure and the railings handrail .

In the packs we have carefully selected a combination of products that we believe will offer you a complete and convenient experience without the need to make additional choices. Therefore, the products in the packs cannot be changed.

Does the kit include the flooring boards?

Yes, the mezzanine floor is included.

For the S, M and L ranges we use 18 mm pine plywood structural panels, with tongue and groove joints on all four sides.

In the XL range, we use P5 HYDRO high-density particle board structural panels, with tongue and groove joints on all four sides and 35 mm thick.

If you want to install your mezzanine outdoors and take care of the floor, we recommend installing the Outdoor Decking. This product is placed over the flooring of the mezzanine, making it a suitable option for outdoor use. It is the ideal waterproof solution to protect the wood flooring and prolong the life of your outdoor mezzanine. In this way, you can create multifunctional spaces such as pergolas, porches, terraces or carports.

Can I close the mezzanine with plasterboards?

Plasterboard is a low density material, so you can make a closing wall on top of the mezzanine. You can also close the lower part of the mezzanine when mezzanine is indoors.

When the closing wall is made in mezzanines installed in the exterior, you should consult tecrostar, since lateral wind load can cause the structure needs stability kits.

Can I have two heights?

No, you can’t. At the moment, our mezzanines are available just for a single height although some customers install them on another existing mezzanine. In that case, the resistance of the existing one should be checked.

Can I install a mezzanine on a sloping floor?

Yes. Provided that the inclination is small, we can use a wedge under the mezzanine columns to level it. If the inclination is too small it might be not necessary at all and the slope might be imperceptible.

Is it possible to install at a lower or higher height than indicated?

Yes, it is possible to reduce the height but not to increase the maximum position.

To reduce the height of S and M mezzanines, you can ask the technical department for a type of short column. With their use the telescopic and adjustable system is maintained, but the maximum and minimum positions of the structure are reduced.

Depending on how short the mezzanine needs to be, the customer may have to make a simple cut on these columns.

To reduce the height of L and XL mezzanines, a special cut must be made. You can order this cut from Tecrostar and we will send you a personalized quotation.

Installation

How can I find and hire an installer for Tecrostar products?

You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.

Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).

In any case, this estimate must be agreed between the client and the fitter.

Shipping

How is the product shipped and received?

The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.

If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.

In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.

How is the package and what are its dimensions?

At Tecrostar, we offer four types of boxes that are carefully designed to adapt to and protect the products. Depending on the products in your order, you will receive one or the other.

Mezzanine floors in the S, M and L range are shipped in the same type of box. The S and M mezzanines require one crate for each shipment. The L range, however, normally requires two crates.

The XL mezzanines are shipped in two boxes; one for the wooden elements and one for the steel elements.

The rest of the products (stairs, handrails and other items) are shipped in smaller boxes.

Tipo de caja

Length (mm)

Width (mm)

Height (mm)

Box for S, M and L

2390

1125

550

Wooden XL Box

3050

1205

710

Iron XL Box

2450

990

735

Small items Box

2350

320

230

*All mezzanine crates are shipped palletised.

Our logistics department packs the products with great care to optimise the space available inside the boxes. Sometimes, smaller products may share a box with mezzanines. In this way we make the most of the space and ensure that everything fits correctly.

What if the access to the delivery address is complicated?

Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support.

If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.

Is the XL range delivered differently?

There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.

The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).

We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.

Telescopic system

Column Protection

The Column Protection is a security element that protects the columns of the mezzanine against impacts they can receive from the machinery being used near the structure as well as forklifts or pallet trucks.

It is formed by 4 independent pieces that are screwed together, forming a set that surrounds the column for its protection. It is installed around the base plate of the column using concrete anchors. Only two or three pieces can also be installed, for such occasions where the column is against the walls.

131.00 €

View product

Compare

Industrial alternating tread stairs 63º

The Industrial Stairs with 63° offset rungs, made of steel, are designed to optimise small spaces and make the most of the available surface area.

The offset steps are carefully designed to offer a safer and more comfortable ascent and descent, distributing weight evenly and providing stability with every step.

690.00 €

View product

Compare

Railing with safety skirting board Extension

The extension is added to the initial railing flank to get 2 extra meters length. You can keep on adding as many extensions as needed to cover the desired length. You can include the corner elbows of handrail to join 2 different sides of the mezzanine.

Its features are the exact same as the Railing. It can be installed in any Tecrostar structure belonging to M, L or XL ranges.

139.00 €

View product

Compare

Railing with safety skirting board

The Railing is a modular railing, 110cm high and up to two meters long, which can be installed in any Tecrostar mezzanine belonging to M, L or XL ranges.

Easy to install and safe. The Railing L kit includes steel posts, handrail, intermediary aluminium bar and safety skirting board 15cm high, tube stoppers and screws.

170.00 €

View product

Compare

Safety pallet gate

The Safety Pallet Gate, also known as Anti-fall tilting barrier, is a collective security and protection element. Its use is mandatory according to the labour risk prevention regulations. It avoids the people falling while lifting loads to a mezzanine or to any other level.

It works as a rocker: the merchandise is deposited in a position using a forklift and taken away in the other position from inside the mezzanine. This way, one of the railing sides is always closed, avoiding falling to a different level with no need to use harness.

The dimensions of the maximum load to deposit and the dimensions of the gate itself depend on the model, as shown in the main image.

921.00 €

View product

Compare

Skylight

Allows the light through to the lower part of the mezzanine and it also permits to walk on it.

It is really easy to install. You just have to make a hole in the desired position of the floor of your Tecrostar mezzanine and, after that, place both the frame and the glass.

32.00 €

View product

Compare

1 other product in the same category:

-4%

Industrial Mezzanine XL pack 120 m²

This set formed by the mezzanine and extensions TXL 32, allows to increase the surface extending the total length in the direction of both the primary beams and the secondary ones. With this square extension, the surface of the mezzanine reaches up to 120 m².

20,277.00 € 19,465.92 €

View product

Compare

Reviews

By Javier G. on 06 May 2024 (Industrial Mezzanine Kit TXL 32) :

The customer has rated the product but has not posted a review, or the review is pending moderation

Customer questions & answers

No questions about the product at the moment,

Show customer questions and answers in other languages (7)

Hide customer questions and answers in other languages (7)

0
votes

Question:

Hola En cuanto a arquitectura de construcción, ¿los postes se consideran cargas puntuales sobre las soleras o forjados? ¿Que carga transmiten los postes al suelo? GraciasBy Customer Tecro Space S.L.U. - 11/28/2020

Answer:

Buenos días Jacobo, Efectivamente, las columnas de la entreplanta suponen cargas puntuales sobre la base en la que se instalan y deben ser consideradas, aunque en los modelos pequeños de la gama...See more Buenos días Jacobo, Efectivamente, las columnas de la entreplanta suponen cargas puntuales sobre la base en la que se instalan y deben ser consideradas, aunque en los modelos pequeños de la gama S o M, estas son mucho menores. Dependiendo del tipo de mezzanine y de la carga uniforme que soportan, el valor de estas cargas varían. Como ejemplo, un módulo TXL32 en su máxima dimensión serían unos 30m2 y soporta una carga de 500kg/m2, por lo que la carga por columna será de 500x30/4 = 3.750kg. Esto es tan solo una primera aproximacioón, si tiene cualquier duda, contacte con nuestro departamento técnico, y en función de su caso le daremos la información concreta sobre estas reacciones. Un saludo,See less By Seller - 11/30/2020