UNO Hanging bracket
Uno Hanging bracket is made of steel with a maximun load capacity of 100kg load. Curved, stylish and simple, it can be installed in the two top holes of any of ours mezzanine beams (screws are included).
Reference: 61004-N
The Stability Bar M is needed when the mezzanine cannot be fixed to two or more walls.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Check the payment and financing facilities that we offer you
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 5 days. Check our delivery times in real time here.
Learn all the benefits of this water-resistant treatment.
The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.
The K-bracing system is as safe as the classic cross-bracing system. Moreover, it allows to pass freely underneath the mezzanine.
Our product is totally detachable and reusable. Therefore, it can be considered as movable property. This feature, always depending on each country’s current legislation, allows its use and installation with no need for planning permission.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.
You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.
At least two adults are required to install Tecrostar mezzanines, (they do not need to be DIY professionals). It is recommended to use safety equipment such as gloves, boots, etc., to avoid any accidents.
For the mezzanine floors in the L and XL range, a scaffolding or ladder system may be required for work at height and manual or electric lifting equipment for the primary beams, especially if the structure is over 3 m high. All other ranges are easily lifted by hand.
You will need the following tools to install the mezzanines: tape measure, a spanner set for nuts and bolts and a screwdriver (an electric screwdriver makes the job much easier), a spirit level, hammer, drill and a cutting tool for the board (handsaw, jigsaw, circular saw...).
Yes. As they are manufactured with light steel profiles with a high yield point they are very light and the load per column is very low. The only restriction is the storage load on the mezzanine: instead of 200kg/m², it may be reduced to 800kg for the whole mezzanine.
A home with a concrete structure usually supports a point load of at least 200kg on a surface of 5x5cm. The T8 mezzanine weighs 199kg and the T15 mezzanine weighs 356kg, both weights are distributed over 4 columns.
You can install either of these two metal mezzanines in your home, provided that the load stored on them is limited. Ask Tecrostar about the specific features of your project.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product. The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
S Range:: 4-6 hours with 2 people
M Range: 8-10 hours with 2 people
L Range: 15-22 hours with 2 people
XL Range: 25-28 hours with 2 people
The time required for fitting accessories (ladders, handrails...) could vary between 2-8 hours depending on the quantity, as well as the type/model of accessory.
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.
Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.
One of the most important sections is attaching the mezzanine. For greater safety and stability we recommend attaching the columns to the floor with the fixings supplied with the kit. In addition, we recommend attaching the mezzanine to the adjoining walls in order to stabilise the structure. The components for attaching the structure to the wall are also included.
Anchoring the columns to the floor adds stability to the structure. We always recommend anchoring them, especially if mezzanines are installed in places where the columns can be knocked into (circulation of forklifts, etc.).
If the mezzanine is installed in a home and it is attached to the wall you can purchase column base kits so you don’t have to anchor the columns to the floor.
Attaching the structure to the wall
Depending on the number of adjoining walls, there are different systems for improving safety and stability.
Key:
A) Wall fixations (supplied with the kit)
B) Stability bar
C) ‘Z’ stability kit
D) Stairs (the stairs stabilise the structure)
E) Wall stability bar
3.1 Without stairs. Four stability bars are required
3.2 With stairs. Three stability bars are required
4.1 Without anchoring to the floor, without walls and without stairs. Two ‘Z’ stability kits and four normal stability bars are required.
4.2 Without anchoring to the floor, without walls and with stairs. Two ‘Z’ stability kits and three normal stability bars are required.
Stability kits are not required but you do need to attach it to the walls. It is important the wood floor is rounded off against the walls.
The walls can be made of different materials, according to which one type of bolt or another must be used to attach the structure to the wall.
M1 – CONCRETE: Screws with plastic anchors
M2 – SOLID BRICK: Screws with plastic anchors
M3 – HOLLOW BRICK: Chemical anchors
M4 – HOLLOW PARTITION WALL: Metallic expansion anchor with screw
M5 – WOOD OR BOARD: Screws can be directly used.
*(These screws and wall anchors are not included in the kit)
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
At Tecrostar, we offer four types of boxes that are carefully designed to adapt to and protect the products. Depending on the products in your order, you will receive one or the other.
Mezzanine floors in the S, M and L range are shipped in the same type of box. The S and M mezzanines require one crate for each shipment. The L range, however, normally requires two crates.
The XL mezzanines are shipped in two boxes; one for the wooden elements and one for the steel elements.
The rest of the products (stairs, handrails and other items) are shipped in smaller boxes.
Box for S, M and L
2390
1125
550
Wooden XL Box
3050
1205
710
Iron XL Box
2450
990
735
Small items Box
2350
320
230
*All mezzanine crates are shipped palletised.
Our logistics department packs the products with great care to optimise the space available inside the boxes. Sometimes, smaller products may share a box with mezzanines. In this way we make the most of the space and ensure that everything fits correctly.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L Range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
Since 1999, our track record speaks for itself: quality, guarantee and commitment to you and our community. Before getting into your hands, each of our products undergoes rigorous testing to ensure it meets the highest standards. In addition, we carefully choose the best materials to assure durability.
We are so confident in the quality of our products and materials that many of them have extended warranty periods.
Below is detailed information about our warranties, the service life of our products and the different environmental conditions that can affect the materials.
Uno Hanging bracket is made of steel with a maximun load capacity of 100kg load. Curved, stylish and simple, it can be installed in the two top holes of any of ours mezzanine beams (screws are included).
-40%
Vinyl planks adhesive floor finishing. The sticker side makes easier lay them over the wooden flooring on Tecrostar mezzanines.
The ‘Z’ Stability Kit is a bracing system formed by several stabilizer bars that are placed in one of the sides of the mezzanine.
It is specially designed for those situations in which the mezzanine cannot be attached to any wall or the pillars cannot be fixed to the existing floor.
Guido Rütt
Bestens durchdacht und qualitativ top .
Stabilität in pragmatischer Form, einfach unerlässlich!
Die Stabilitätsstangen sind echt super einfach zu installieren, ein Feature, dass man auf keinen Fall weglassen sollte. Einfach installiert und super in der Wirkung.
Perferkt
Sehr gute Qualität, schnelle Lieferung, sehr guter Kundendienst. Rund um, ein tolles Produkt.
Excellent produit
Ce produit est parfait. Un très bon rapport qualité prix
Stability kit
The two bars are great and work well, but if your deck is fully free standing I would advise you get two kits for full stability.