- -4%
STRAIGHT STAIRS / SPIRAL STAIRS / VERTICAL STAIRS / BOAT LADDER / LATERAL STAIRS / STRAIGHT STAIRS / JAPANESE / TRUCKLE BED / ALTERNATING TREAD STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
Height: From 235cm to 381cm
SURFACE: From 7m2 to 37m2
Height: From 235cm to 381cm
Surface: From 7m2 to 37m2
* All stairs can be installed outside our mezzanines.
STANDARD / 4 TUBES / PANEL / ROPES / EXTENSIONS
PUBLIC ACCESS / SAFETY SKIRTING BOARD / WITH PLATE / SLAT RAILING WITH PLATE / EXTENSIONS /
LOFT BED / LOW
SAFETY PALLET GATE / DOUBLE-HINGED GATE / DOUBLE-HINGED GATE WITH SAFETY ZONE
LATERAL STAIRS / FOLDING STAIRS TO WALL
* All railings can be installed outside our mezzanines
Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.
Industrial Mezzanine XL pack 120 m²
Reference: 13100-NA
Nobody has posted a review yet
This set formed by the mezzanine and extensions TXL 32, allows to increase the surface extending the total length in the direction of both the primary beams and the secondary ones. With this square extension, the surface of the mezzanine reaches up to 120 m².
See more
19,465.92 €
20,277.00 €
Save 4%
- On sale!
- -4%
Description
The Mezzanine 120 m² set consists of,
-
Our product is totally detachable and reusable. Therefore, it can be considered as movable property. This feature, always depending on each country’s current legislation, allows its use and installation with no need for planning permission.
-
The products can be located indoors and outdoors taking into account some recommendations.
-
Tecro Space S.L. no se responsabiliza del posible uso ni instalación inadecuada del producto.
-
There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of truck, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you think there is any kind of restriction, please contact us.
-
The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate).
-
We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Data sheet
13100-NA
- Type of product
- Only Mezzanine
- Range
- XL
- Compatibility
- XL
- Available heights above beams (cm) (HV)
- 353, 365, 377, 232, 250, 256, 274, 280, 298, 304, 323, 329, 347, 359, 371, 238, 244, 262, 268, 286, 292, 310, 317, 335, 341
- Total height (cm) (HT)
- [HV] + [HF]
- Height-adjustable every (cm)
- 6,05
- Total maximum load (Kg)
- 17709
- Beam height (cm) (HB)
- 32,5
- Width/Length-adjustable every (cm)
- 10
- Maximum length of the primary beam (cm) (LT)
- 1027
- Minimum length of the primary beam (cm) (LT)
- 667
- Maximum length of the secondary beam (cm) (DT)
- 1116
- Minimum length of the secondary beam (cm) (DT)
- 656
- Maximum area (m²)
- 114,61
- Minimum area (m²)
- 43,76
- Load capacity in its minimum extension (kg/m²)
- 1200
- Load capacity in its maximum extension (kg/m²)
- 500
- Flooring (HF)
- High-density structural board, 35 mm thick, with P5 HYDRO quality. Waterproof and with tongue and groove joints in its four sides
- Material and finish of the structure
- Structural steel painted with powder coating
- Net weight (Kg)
- 6641
- Gross weight (Kg with packaging)
- 6673
- Maximum height above beam (cm) (HV max)
- 377
- Minimum height above beam (cm) (HV min)
- 232
- Clear height (cm) (HL)
- [HV] - [HB]
- Floor thickness (cm) (HF)
- 3,5
FAQs
General
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.
We do not currently offer an on-site measurement service. However, we recommend you explore the Mr Assembler website, where you can find assemblers who do offer this service. In addition, their platform allows you to hire an assembly service for the products you need.
You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.
No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.
The mezzanines with an industrial usage require neither a building license for their assembly nor meeting the maximum constructed surface limits of the pavillion. As they are removable and hence personal property, they are subject to the same legal regime as the machinery, the racks, the vehicles, etc.
Mezzanines
The key to choosing the right mezzanine is to be sure of how you will be using it.
If you want to use it at home, whether in a cosy bedroom, in a relaxing living room or in a garage to create extra space, you should consider the S or M ranges. The mezzanines of these ranges allow you to create a raised area between 160 cm and 182 cm high.
If you want to extend a commercial space, add a balcony to your garden or create a second storey warehouse or a large garage, we recommend the L mezzanines. From 209 cm to 343 cm high.
XL mezzanines are for larger projects. For example, you can fit out industrial premises or increase your company's productivity and storage capacity. These mezzanines range in height from 235 cm to 380 cm.
Once you know how you want to use your Tecrostar mezzanine, the next step is to fine-tune the details such as height, area and load capacity so that it fits your project perfectly. You can also add stairs, railings and other accessories.
We might have various models of mezzanine that meet the dimensions you need. In this case, follow these criteria:
1- Load-bearing capacity
2- Maximum span (Distance between columns)
3- Beam height
4- Height of the mezzanine above the decking you need
You can increase the surface using the extension kits. Get these kits at the same time as your mezzanine or in the future, when you need more space.
These kits are height-adjustable as well and allow to multiply the surface of our mezzanine.
No, it is not a customised mezzanine but its telescopic design enables an almost customised finish. This system is length, width and height adjustable, achieving the preferred measurements.
A: adjustable every 6 cm
B: adjustable every 10 cm
C: adjustable every 10 cm
In our shop, we offer two combinations: kits and packs.
In the case of the kits, you can choose the colour of the structure and the railings handrail .
In the packs we have carefully selected a combination of products that we believe will offer you a complete and convenient experience without the need to make additional choices. Therefore, the products in the packs cannot be changed.
Yes, the mezzanine floor is included.
For the S, M and L ranges we use 18 mm pine plywood structural panels, with tongue and groove joints on all four sides.
In the XL range, we use P5 HYDRO high-density particle board structural panels, with tongue and groove joints on all four sides and 35 mm thick.
If you want to install your mezzanine outdoors and take care of the floor, we recommend installing the Outdoor Decking. This product is placed over the flooring of the mezzanine, making it a suitable option for outdoor use. It is the ideal waterproof solution to protect the wood flooring and prolong the life of your outdoor mezzanine. In this way, you can create multifunctional spaces such as pergolas, porches, terraces or carports.
Plasterboard is a low density material, so you can make a closing wall on top of the mezzanine. You can also close the lower part of the mezzanine when mezzanine is indoors.
When the closing wall is made in mezzanines installed in the exterior, you should consult tecrostar, since lateral wind load can cause the structure needs stability kits.
No, you can’t. At the moment, our mezzanines are available just for a single height although some customers install them on another existing mezzanine. In that case, the resistance of the existing one should be checked.
Yes. Provided that the inclination is small, we can use a wedge under the mezzanine columns to level it. If the inclination is too small it might be not necessary at all and the slope might be imperceptible.
Yes, it is possible to reduce the height but not to increase the maximum position.
To reduce the height of S and M mezzanines, you can ask the technical department for a type of short column. With their use the telescopic and adjustable system is maintained, but the maximum and minimum positions of the structure are reduced.
Depending on how short the mezzanine needs to be, the customer may have to make a simple cut on these columns.
To reduce the height of L and XL mezzanines, a special cut must be made. You can order this cut from Tecrostar and we will send you a personalized quotation.
Installation
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.
Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.
Shipping
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
At Tecrostar, we offer four types of boxes that are carefully designed to adapt to and protect the products. Depending on the products in your order, you will receive one or the other.
Mezzanine floors in the S, M and L range are shipped in the same type of box. The S and M mezzanines require one crate for each shipment. The L range, however, normally requires two crates.
The XL mezzanines are shipped in two boxes; one for the wooden elements and one for the steel elements.
The rest of the products (stairs, handrails and other items) are shipped in smaller boxes.
Tipo de caja
Length (mm)
Width (mm)
Height (mm)
Box for S, M and L
2390
1125
550
Wooden XL Box
3050
1205
710
Iron XL Box
2450
990
735
Small items Box
2350
320
230
*All mezzanine crates are shipped palletised.
Our logistics department packs the products with great care to optimise the space available inside the boxes. Sometimes, smaller products may share a box with mezzanines. In this way we make the most of the space and ensure that everything fits correctly.
Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support.
If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.
There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.
The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).
We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
You might also like
1 other product in the same category:
- -4%
Reviews
Customer questions & answers
This set formed by the mezzanine and extensions TXL 32, allows to increase the surface extending the total length in the direction of both the primary beams and the secondary ones. With this square extension, the surface of the mezzanine reaches up to 120 m².