







Reference: 31800-N
It has been designed to optimize reduced spaces and to take advantage of the available surface. The industrial Alternating Tread Stairs help to create an open-plan space in an efficient and safe manner.
Based on the American model, Lapeyre, it prioritises the verticality using shallow treads and eases going up and downstairs with packages.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Check the payment and financing facilities that we offer you
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 5 days. Check our delivery times in real time here.
Ask us about the waterproof option.
These stairs are height-adjustable and can be installed perpendicular to the structure or parallel to it using a Stair Landing. They can also be located inside the structure by using a Beam for interior stairs.
This staircase allows to freely get around the ground floor without obstacles. It is available in security yellow colour and black.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
The stairs can be placed in different positions, increasing the possible configurations
Yes, provided that the height matches. All our stairs can be located in any of our structures. As the structures, the stairs are height-adjustable. We have several different types of stairs, to ensure the height compatibility with the selected mezzanine.
Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details
Yes. They can be installed on a surface that is not a Tecrostar surface.
Wall anchors for concrete or brick are used to fix staircases to walls made of these materials.
The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.
If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:
What regulations do our stairs comply with?
In TecroStar there are different types of staircases: some for private use, usually located in small spaces, some for general use, wider and more comfortable, suitable for workplaces or commercial premises.
There are in place many regulations for staircases in the different countries in which TecroStar is present. Therefore, it is difficult to determine whether a staircase type complies with a particular normative.
Our stairs are designed by defining the general criteria for each type of staircase, so that these are well defined and checked against those in the regulations:
However, some regulations also refer to very specific construction parameters and details, which must be interpreted by the customer.
There are very few international standards that cover the design of staircases, one of which is ISO 14122 "Safety of machinery. Permanent means of access to machinery and industrial installations", whose criteria are suitable for our category https://www.tecrostar.com/easily-accessible-stairs . For all other regulations, the general criteria should be verified, which can be easily compared with the data in the Technical Data Sheets. Further details can be obtained from TecroStar.
Defining the intended use of the staircase is basic in most standards. Staircases are generally classified as service or private stairs, as well as general or public use stairs, the latter being more demanding.
If you have a specific regulation that your staircase must comply with, you can ask us and we will try to help you in your decision.
The anchor that joins the stairs to the mezzanine can attach the stairs with 4 or 2 screws. If you choose the configuration of just 2 screws, the stairs can pivot. In any case, the stairs have the same resistance.
Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.
The stairs include the maximum number of steps that are required in their maximum heights. The more the height is reduced, the less steps will be installed. However, you can acquire additional steps as spare parts, the number of steps is designed according to the inclination of each staircase though. An excessive number of steps would reduce the going available for treading, specially important when going down.
Yes, the railing of both sides of the stairs is removable and, therefore, it can be taken off. However, Tecrostar recommends to install it for security and because they provide rigidity to the stairs as well.
On the other hand, the stairs include the railing; it is not possible to acquire them without the railing.
For the orders that include just the stairs, the dimensions of the package are:
Length: 235cm
Width: 32cm
Height: 31cm
The weight depends on the model of the stairs. Check the product sheet.
Yes. You will have to acquire the beam for interior stairs.
Check the the table with the specifications of each staircase to get this information.
No, you can’t.
To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accidents.
When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.
You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)
You can find all the tools required to assemble it and tested by Tecrostar in the tools section.
All the models are installed by following these steps:
Pre-assemble the structure on the floor in the desired area.
Raise the outer structure to the desired height
Finish assembling the structure and floor.
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L Range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
To determine the delivery date, it is important to understand the various stages your order goes through, as well as the dispatch and shipping time concepts.
- When we receive your order request, we review it to check the compatibility between products (ranges, colours...).
Once we can verify that everything is correct, your order gets APPROVED (usually within 1 working day).
- As soon as we start preparing your order in the warehouse you will receive an automatic email. At this moment you can check that the status has changed to PROCESSING IN PROGRESS. This is when we carefully handle and package each product so that everything arrives in perfect condition.
Dispatch time corresponds to the period comprised from the order approval to the time this leaves our facilities, which depends on both our team and internal processes. We are committed to working towards keeping it to the possible minimum (5 working days).
-When everything is PREPARED AND READY TO BE SHIPPED, we hand over your order to the transport agency and the order status changes to SHIPPED.
We will send you an email where you will find useful information and recommendations about the delivery process.
As we distribute our products all over the world, we work with different transport companies external to Tecrostar. So that you can enjoy your order as soon as possible, we assess the available options and choose the fastest and with the best conditions offered in each case.
We do our best to give you a delivery estimate, but once the goods leave our premises, the shipping time depends solely on the carrier. Please note that there are external factors that may affect the shipping time, such as the geographical location, unforeseen weather conditions or Customs clearance procedures. As an example, transit time for Zone A countries usually varies from 3 to 7 working days.
For approximate shipping times to other countries please contact us.
If you choose the waterproof or RAL personalised colour options, please note that the delivery of your order will take longer as metal parts will need additional treating or painting.
The TXL32 is a metallic and removable mezzanine that allows the stock of heavy loads. Its greatest advantage is that you can acquire it no waiting for quotes, measurements and technical drawings.
Learn more about our innovative industrial range.
The wooden ladder is made of high-quality beech wood. The inclination of the ladder is 80º. The versatile design and easy installation of this product make it perfect for any environment, whether on a Tecrostar range S mezzanine or on any other surface through the top anchoring system.
The Boat ladder is made of high quality pine plywood with a natural finishing. It has an inclination of 70º and it includes a handrail which ease the ascent and descent. It can be installed at any small structure. It can also be adapted easily at any height, cutting its stringers at the marks disposed in the same ones.
The Straight Stairs are the perfect solution for reduced spaces thanks to their versatility and ease of installation. With the option to adjust its height, these become the best choice to optimise the use of the available space in homes, work areas, garages, warehouses and commercial premises.
The Truckle Bed Stairs ease the access to the structure and can be used independently in different locations. These stairs are not height-adjustable, but they can be rotated thanks to their versatile anchoring that allows the access to the objects under the structure.
Made of high-quality materials and easy to install, and can be located in any of the sides perpendicular to the Truckle Bed structure.
The Lateral Stairs can be adjusted in different heights to access to Small Mezzanines. In addition, they can be located in M and L mezzanines provided that the height of both of them is the same. In such occasions, any simple modification in the primary beam will be needed such as additional holes with a domestic drill or cuts to allow the correct assembly.
They can also be used independently in other existing structures thanks to a versatile upper anchoring system.
Made of high quality steel, the Tecrostar spiral stairs are a winning choice if you are looking for a sturdy and safe staircase able to fit in tight spaces. It guarantees a comfortable user experience.
In addition, it includes a side railing and steel rungs that offer a firm grip when ascending and descending. It adapts to any surface, which means it can be installed on Tecrostar mezzanines or in any other location. Lacquered finish in white, black or custom RAL.
Alternating tread stairs S have alternating tread steps, with adjustable height, to provide access between the two floors (the same max height as T8 mezzanine). They can be installed on any of the four sides, in parallel to the structure with a S landing or perpendicular to the mezzanine, as well as inside the mezzanine floor.
ESCALERA PELDAÑO COMPENSADO
Producto esplendido y eficaz
Facil instalación y buen manual de montaje