Cart

Subtotal 0.00 €

Shipping

Taxes 0.00 €

Total 0.00 €

Compare

Call me back! WhatsApp +44 (0)20 3695 5553

from 7:00 to 15:00



Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.

'A' Extension TXL 32

Reference: 73002-NA

Nobody has posted a review yet

The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.

The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.

5,334.00 €

Quantity

Compare

Colour : Black Yellow

Black Yellow

In Stock

Free delivery

Only when total amount exceeds 1000€ (TAX excl.).

We do deliver worldwide

Dispatched in 5 days. Check our delivery times in real time here.

Several methods of payment

Credit card, bank transfer, PayPal...

Special conditions for your business

Check the payment and financing facilities that we offer you.

Talk with a specialist. Call to 020 3695 5553

Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.

Waterproof option

Learn all the benefits of this water-resistant treatment.

Description

The "A" extension of the structure includes two simple columns adjustable in height, the same as those of the initial module, which are placed at the end of the extension module. It has the same length-adjustable beams, although with one less secondary beam, as the last one of the previous module is used. It also includes the load-bearing floor of structural boards to cover the new surface.

Our product is totally detachable and reusable. Therefore, it can be considered as movable property. This feature, always depending on each country’s current legislation, allows its use and installation with no need for planning permission.
The products can be located indoors and outdoors taking into account some recommendations.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of truck, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you think there is any kind of restriction, please contact us.
The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate).
We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.

Data sheet

Reference 73002-NA

Type of product: Extensions kits
Range: Industrial XL
Compatibility: Extra Large
Maximum height above the flooring board (cm) (HT): 381
Minimum height above the flooring board (cm) (HT): 235
Available heights above beams (cm) (HV): 232, 238, 244, 250, 256, 262, 268, 274, 280, 286, 292, 298, 304, 310, 317, 323, 329, 335, 341, 347, 353, 359, 365, 371, 377
Height-adjustable every (cm): 6,05
Total maximum load (Kg): 13900
Beam height (cm) (HB): 32,5
Width/Length-adjustable every (cm): 10
Maximum length of the primary beam (cm) (LT): 500
Minimum length of the primary beam (cm) (LT): 330
Maximum length of the secondary beam (cm) (DT): 556
Minimum length of the secondary beam (cm) (DT): 326
Maximum area (m²): 27,80
Minimum area (m²): 10,76
Load capacity in its minimum extension (kg/m²): 1200
Load capacity in its maximum extension (kg/m²): 500
Flooring (HF): High-density structural board, 35 mm thick, with P5 HYDRO quality. Waterproof and with tongue and groove joints in its four sides
Material and finish of the structure: Structural steel painted with powder coating

FAQs

General

Do I have technical support for my project?

Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.

Can someone come to measure or advise me?

We do not currently offer an on-site measurement service. However, we recommend you explore the Mr Assembler website, where you can find assemblers who do offer this service. In addition, their platform allows you to hire an assembly service for the products you need.

Can I install Tecrostar products outdoors?

Guide for outdoors

Can I install a Tecrostar product making modifications of it?

You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.

Do I have to ask for a building permit or license to assemble my mezzanine?

No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.

The mezzanines with an industrial usage require neither a building license for their assembly nor meeting the maximum constructed surface limits of the pavillion. As they are removable and hence personal property, they are subject to the same legal regime as the machinery, the racks, the vehicles, etc.

Characteristics of the materials

Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S355, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
Structure hardware grade 8.8
Anodized aluminium apt for outdoor use
The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

Mezzanines

Which mezzanine is the right for me?

The key to choosing the right mezzanine is to be sure of how you will be using it.

If you want to use it at home, whether in a cosy bedroom, in a relaxing living room or in a garage to create extra space, you should consider the S or M ranges. The mezzanines of these ranges allow you to create a raised area between 160 cm and 182 cm high.

If you want to extend a commercial space, add a balcony to your garden or create a second storey warehouse or a large garage, we recommend the L mezzanines. From 209 cm to 343 cm high.

XL mezzanines are for larger projects. For example, you can fit out industrial premises or increase your company's productivity and storage capacity. These mezzanines range in height from 235 cm to 380 cm.

Once you know how you want to use your Tecrostar mezzanine, the next step is to fine-tune the details such as height, area and load capacity so that it fits your project perfectly. You can also add stairs, railings and other accessories.

More than one mezzanine suits my needs, which should I choose?

We might have various models of mezzanine that meet the dimensions you need. In this case, follow these criteria:

1- Load-bearing capacity

2- Maximum span (Distance between columns)

3- Beam height

4- Height of the mezzanine above the decking you need

I need more surface, what solutions are there?

You can increase the surface using the extension kits. Get these kits at the same time as your mezzanine or in the future, when you need more space.

These kits are height-adjustable as well and allow to multiply the surface of our mezzanine.

Is it a customised mezzanine? How does the Tecrostar system work?

No, it is not a customised mezzanine but its telescopic design enables an almost customised finish. This system is length, width and height adjustable, achieving the preferred measurements.

A: adjustable every 6 cm

B: adjustable every 10 cm

C: adjustable every 10 cm

Does the kit include the flooring boards?

Yes, the mezzanine floor is included.

For the S, M and L ranges we use 18 mm pine plywood structural panels, with tongue and groove joints on all four sides.

In the XL range, we use P5 HYDRO high-density particle board structural panels, with tongue and groove joints on all four sides and 35 mm thick.

If you want to install your mezzanine outdoors and take care of the floor, we recommend installing the Outdoor Decking. This product is placed over the flooring of the mezzanine, making it a suitable option for outdoor use. It is the ideal waterproof solution to protect the wood flooring and prolong the life of your outdoor mezzanine. In this way, you can create multifunctional spaces such as pergolas, porches, terraces or carports.

Is there any other alternative to the wooden floor?

No. Tecrostar does not have a different flooring alternative. However, it is possible to personalize the finish of the floor by adding some accessories on the boards (carpet, platform,...). Check our floor finishes in accessories section. If the customer installs a different floor from the boards provided, it is their responsibility to ensure the resistance of the full mezzanine, since the floor contributes to the stability of the whole.

Can I close the mezzanine with plasterboards?

Plasterboard is a low density material, so you can make a closing wall on top of the mezzanine. You can also close the lower part of the mezzanine when mezzanine is indoors.

When the closing wall is made in mezzanines installed in the exterior, you should consult tecrostar, since lateral wind load can cause the structure needs stability kits.

Can I have two heights?

No, you can’t. At the moment, our mezzanines are available just for a single height although some customers install them on another existing mezzanine. In that case, the resistance of the existing one should be checked.

Can I install a mezzanine on a sloping floor?

Yes. Provided that the inclination is small, we can use a wedge under the mezzanine columns to level it. If the inclination is too small it might be not necessary at all and the slope might be imperceptible.

Is it possible to install at a lower or higher height than indicated?

Yes, it is possible to reduce the height but not to increase the maximum position.

To reduce the height of S and M mezzanines, you can ask the technical department for a type of short column. With their use the telescopic and adjustable system is maintained, but the maximum and minimum positions of the structure are reduced.

Depending on how short the mezzanine needs to be, the customer may have to make a simple cut on these columns.

To reduce the height of L and XL mezzanines, a special cut must be made. You can order this cut from Tecrostar and we will send you a personalized quotation.

Installation

Can the mezzanine be installed without columns or removing a column? Attached to walls

No, our mezzanines are sold with columns by default. We cannot guarantee the resistance of walls or corbels and the customer will be responsible if the product is modified in these cases.

What are the steps and materials required to install a mezzanine?

At least two adults are required to install Tecrostar mezzanines, (they do not need to be DIY professionals). It is recommended to use safety equipment such as gloves, boots, etc., to avoid any accidents.

For the mezzanine floors in the L and XL range, a scaffolding or ladder system may be required for work at height and manual or electric lifting equipment for the primary beams, especially if the structure is over 3 m high. All other ranges are easily lifted by hand.

You will need the following tools to install the mezzanines: tape measure, a spanner set for nuts and bolts and a screwdriver (an electric screwdriver makes the job much easier), a spirit level, hammer, drill and a cutting tool for the board (handsaw, jigsaw, circular saw...).

This video shows you how to install a TM 15 mezzanine.

Can I install the mezzanine in my apartment? Will the structural floor bear the weight?

Yes. As they are manufactured with light steel profiles with a high yield point they are very light and the load per column is very low. The only restriction is the storage load on the mezzanine: instead of 200kg/m², it may be reduced to 800kg for the whole mezzanine.

A home with a concrete structure usually supports a point load of at least 200kg on a surface of 5x5cm. The T8 mezzanine weighs 199kg and the T15 mezzanine weighs 356kg, both weights are distributed over 4 columns.

You can install either of these two metal mezzanines in your home, provided that the load stored on them is limited. Ask Tecrostar about the specific features of your project.

How long does it take to install a mezzanine on my own?

You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product. The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.

S Range:: 4-6 hours with 2 people

M Range: 8-10 hours with 2 people

L Range: 15-22 hours with 2 people

XL Range: 25-28 hours with 2 people

The time required for fitting accessories (ladders, handrails...) could vary between 2-8 hours depending on the quantity, as well as the type/model of accessory.

How can I find and hire an installer for Tecrostar products?

You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.

Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).

In any case, this estimate must be agreed between the client and the fitter.

Shipping

How is the product shipped and received?

The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.

If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.

In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.

How is the package and what are its dimensions?

At Tecrostar, we offer four types of boxes that are carefully designed to adapt to and protect the products. Depending on the products in your order, you will receive one or the other.

Mezzanine floors in the S, M and L range are shipped in the same type of box. The S and M mezzanines require one crate for each shipment. The L range, however, normally requires two crates.

The XL mezzanines are shipped in two boxes; one for the wooden elements and one for the steel elements.

The rest of the products (stairs, handrails and other items) are shipped in smaller boxes.

Tipo de caja

Length (mm)

Width (mm)

Height (mm)

Box for S, M and L

2390

1125

550

Wooden XL Box

3050

1205

710

Iron XL Box

2450

990

735

Small items Box

2350

320

230

*All mezzanine crates are shipped palletised.

Our logistics department packs the products with great care to optimise the space available inside the boxes. Sometimes, smaller products may share a box with mezzanines. In this way we make the most of the space and ensure that everything fits correctly.

What if the access to the delivery address is complicated?

Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support.

If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.

Is the XL range delivered differently?

There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.

The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).

We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.

Telescopic system

Adaptador para accesorios en la viga primaria XL

Adapter for Accessories in Primary Beam XL

This connector is used to adapt the accessories to the primary beam of the Mezzanine XL. Thanks to this piece, the elements that are added to the mezzanine are fixed with greater solidity. The adapter can be used to include both the railing posts as well as to join the stairs and the stair landing to the primary beam.

12.00 €

View product

Compare

Stability Column

The stability column is an inclined bar that is placed in a column of the mezzanines. It ensures the lateral stability in a determined side and direction.

It consists of a telescopic extensible bar that is joint to the column in its upper side. The bar is fixed to the floor at a distance of 1,3 metres from the column base plate removing, this way, the movement of the mezzanine in the side where it is installed.

148.00 €

View product

Compare

'B' Extension TXL 32

The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.

The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.

5,705.00 €

View product

Compare

-4%

'AB' Extension TXL 32

The extension modules have very similar load capacity, dimensions and surface area to those of the initial module.

5,173.00 €

View product

Compare

'AB' Extension TXL 29

The extension modules have very similar load capacity, dimensions and surface area to those of the initial module.

4,625.00 €

View product

Compare

The extension modules have very similar load capacity, dimensions and surface area to those of the initial module.

7,057.00 €

View product

Compare

'B' Extension TXL 32

The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.

The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.

5,705.00 €

View product

Compare

“A” Extension TXL 30

The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.

The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.

6,762.00 €

View product

Compare

'B' Extension TXL 37

The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.

The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.

7,587.00 €

View product

Compare

Reviews

Be the first to write your review !

Cookie name	Provider	Purpose	Expiry
cookiesplus	www.tecrostar.com	Stores your cookie preferences.	1 year
PHPSESSID	www.tecrostar.com	This cookie is native to PHP and enables websites to store serialised state data. It is used to establish a user session and to pass state data via a temporary cookie, which is commonly referred to as a session cookie.	Session
PrestaShop-#	www.tecrostar.com	This cookie helps keep user sessions open while they are visiting a website, and help them make orders and many more operations such as: cookie add date, selected language, used currency, last product category visited, last seen products, client identification, name, first name, encrypted password, email linked to the account, shopping cart identification.	6000 hours
test_cookie	Doubleclick.net	Check for cookies user permission	15 minutes

Cookie name	Provider	Purpose	Expiry
AEC	Google	‘AEC’ cookies ensure that requests within a browsing session are made by the user, and not by other sites. These cookies prevent malicious sites from acting on behalf of a user without that user’s knowledge	2 years
arlsf_c	Live Sales Popup	Sales popup user tracking	Session
arlsf_key	Tecrostar	Sales popup user tracking	1 day
SOCS	Google	Store user cookie choices	13 months

Cookie name	Provider	Purpose	Expiry
TawkConnectionTime	www.tecrostar.com	Allows the website to recognise the visitor, in order to optimize the chat-box functionality.	Session
_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_ga_#	Google	Used by Google Analytics to collect data on the number of times a user has visited the website as well as dates for the first and most recent visit.	2 years
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day
_hjSessionUser_#	Hotjar	Hotjar cookie that is set when a user first lands on a page with the Hotjar script. It is used to persist the Hotjar User ID, unique to that site on the browser. This ensures that behavior in subsequent visits to the same site will be attributed to the same user ID.	1 year
_hjSession_#	Hotjar	A cookie that holds the current session data. This ensures that subsequent requests within the session window will be attributed to the same Hotjar session.	session

Cookie name	Provider	Purpose	Expiry
ads/ga-audiences	Google	These cookies are used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor’s online behaviour across websites.	Session
twk_*	Tawk	Tawk session data	Session
twk_uuid_*	Tawk	Tawk session data	At least one session
YSC	youtube.com	Registers a unique ID to keep statistics of what videos from YouTube the user has seen.	Session
_gcl_au	Google	It takes information in ad clicks and stores it in a first-party cookie so that conversions can be attributed outside the landing page.	Persistent
__Secure-ENID	Google	Builds a profile of website visitor interests to show relevant and personalized ads through retargeting.	2 years

Cart

Small

Comparison S

Medium

Comparison M

Large

Comparison L

Extra Large

Comparison XL

GALLERY

MEZZANINES

STAIRS

Want to see more pictures?

Looking for an installer?

'A' Extension TXL 32

Free delivery

We do deliver worldwide

Several methods of payment

Special conditions for your business

Talk with a specialist. Call to 020 3695 5553

Waterproof option

Want to see more pictures?

Looking for an installer?

General

Mezzanines

Installation

Shipping

Tipo de caja

Length (mm)

Width (mm)

Height (mm)

You might also like

14 other products in the same category:

Reviews

Customer questions & answers