REDUCED SPACES
STRAIGHT STAIRS / SPIRAL STAIRS / VERTICAL STAIRS / BOAT LADDER / LATERAL STAIRS / STRAIGHT STAIRS / JAPANESE / TRUCKLE BED / ALTERNATING TREAD STAIRS
EASILY ACCESSIBLE STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
FOLDING STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
STAIR LANDING
Height: From 235cm to 381cm
SURFACE: From 7m2 to 37m2
BEAM FOR INTERIOR STAIRS
Height: From 235cm to 381cm
Surface: From 7m2 to 37m2
* All stairs can be installed outside our mezzanines.
STANDARD
STANDARD / 4 TUBES / PANEL / ROPES / EXTENSIONS
SECURITY
PUBLIC ACCESS / SAFETY SKIRTING BOARD / WITH PLATE / SLAT RAILING WITH PLATE / EXTENSIONS /
LOW
LOFT BED / LOW
EXTENSIONS
LOADING GATES
SAFETY PALLET GATE / DOUBLE-HINGED GATE / DOUBLE-HINGED GATE WITH SAFETY ZONE
STAIRS
LATERAL STAIRS / FOLDING STAIRS TO WALL
* All railings can be installed outside our mezzanines
Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.
Primary Beam TXL 29
Reference: 84060-N
Nobody has posted a review yet
738.00 €
Data sheet
84060-N
- {0}
FAQs
General
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.
You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.
Installation
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.
Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.
Shipping
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L Range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
16 other products in the same category:
Secondary Beam TM 10 / TM 7
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TM 10 / TM 7 |
Price
93.00 €
Primary Beam TM 15 / TM 7
The M Primary Beam consists of an interior beam and an exterior one. It features every needed screw.
- Minimum length: 225cm, maximun length: 415cm
- Beam height: 20cm
Price
216.00 €
Primary Beam TXL 32
The S Primary Beam consists of an interior beam and an exterior one. It features every needed screw.
- Minimum length: 155cm, maximun length: 275cm
- Beam height: 10cm
Price
993.00 €
Secondary Beam TL 30 / TL 35
The secondary beam consists of two inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TL 30 / TL 35 |
Price
291.00 €
Opposite Primary Beam TM 10
The Opposite Primary Beam TM 10 consists of two interior beams and one exterior beam. It features every needed screw.
- Minimum length: 455cm, maximun length: 605cm
- Beam height: 20cm
Price
309.00 €
Opposite Primary Beam TL 30 / TL 20
The L Opposite Primary Beam consists of two exterior beams and one interior beam. It features every needed screw.
- Minimum length: 345cm, maximun length: 535cm
- Beam height: 30cm
Price
861.00 €
Secondary Beam TS 5
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TS 5 |
Price
45.00 €
Reviews
Customer questions & answers