STRAIGHT STAIRS / SPIRAL STAIRS / VERTICAL STAIRS / BOAT LADDER / LATERAL STAIRS / STRAIGHT STAIRS / JAPANESE / TRUCKLE BED / ALTERNATING TREAD STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
Height: From 235cm to 381cm
SURFACE: From 7m2 to 37m2
Height: From 235cm to 381cm
Surface: From 7m2 to 37m2
* All stairs can be installed outside our mezzanines.
STANDARD / 4 TUBES / PANEL / ROPES / EXTENSIONS
PUBLIC ACCESS / SAFETY SKIRTING BOARD / WITH PLATE / SLAT RAILING WITH PLATE / EXTENSIONS /
LOFT BED / LOW
SAFETY PALLET GATE / DOUBLE-HINGED GATE / DOUBLE-HINGED GATE WITH SAFETY ZONE
LATERAL STAIRS / FOLDING STAIRS TO WALL
* All railings can be installed outside our mezzanines
Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.
Opposite Primary Beam TXL 30 / TXL 37
Reference: 84080-N
Nobody has posted a review yet
2,069.00 €
Data sheet
84080-N
- {0}
FAQs
Shipping
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L Range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
16 other products in the same category:
Secondary Beam TL 30 / TL 35
The secondary beam consists of two inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TL 30 / TL 35 |
Price
297.00 €
Opposite Primary Beam TM 10
The Opposite Primary Beam TM 10 consists of two interior beams and one exterior beam. It features every needed screw.
- Minimum length: 455cm, maximun length: 605cm
- Beam height: 20cm
Price
315.00 €
Secondary Beam TM 10 / TM 7
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TM 10 / TM 7 |
Price
95.00 €
Opposite Primary Beam TL 30 / TL 20
The L Opposite Primary Beam consists of two exterior beams and one interior beam. It features every needed screw.
- Minimum length: 345cm, maximun length: 535cm
- Beam height: 30cm
Price
878.00 €
Secondary Beam TS 5
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TS 5 |
Price
46.00 €
Secondary Beam TXL 20 / TXL 29 / TXL 30
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TXL 20 / TXL 29 / TXL 30 |
Price
340.00 €
Secondary Beam TXL 32 / TXL 37
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TXL 32 / TXL 37 |
Price
337.00 €
Primary Beam TM 15 / TM 7
The M Primary Beam consists of an interior beam and an exterior one. It features every needed screw.
- Minimum length: 225cm, maximun length: 415cm
- Beam height: 20cm
Price
220.00 €
Reviews
Customer questions & answers