We will be on vacation from 17/04 to 21/04. If you have any urgent matters, please let us know in advance, thank you! š x
STRAIGHT STAIRS / SPIRAL STAIRS / VERTICAL STAIRS / BOAT LADDER / LATERAL STAIRS / STRAIGHT STAIRS / JAPANESE / TRUCKLE BED / ALTERNATING TREAD STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
Height: From 235cm to 381cm
SURFACE: From 7m2 to 37m2
Height: From 235cm to 381cm
Surface: From 7m2 to 37m2
* All stairs can be installed outside our mezzanines.
STANDARD / 4 TUBES / PANEL / ROPES / EXTENSIONS
PUBLIC ACCESS / SAFETY SKIRTING BOARD / WITH PLATE / SLAT RAILING WITH PLATE / EXTENSIONS /
LOFT BED / LOW
SAFETY PALLET GATE / DOUBLE-HINGED GATE / DOUBLE-HINGED GATE WITH SAFETY ZONE
LATERAL STAIRS / FOLDING STAIRS TO WALL
* All railings can be installed outside our mezzanines
Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.
Reference: 80060-B
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be.Ā Click here to contact us.
You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customerās responsibility.
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.Ā
Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.Ā
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground.Ā The order will be delivered at street level to the address specified by the customer.Ā
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process.Ā That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate).Ā We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L Range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
Increase the usable surface of a small room with the TS5. Manageable, light and sturdy; this mezzanine allows to take advantage of the space in rooms, storage rooms, balconies and stores.
The L Opposite Primary Beam consists of two exterior beams and one interior beam. It features every needed screw.
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TS 4 / TS 8 |
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TXL 20 / TXL 29 / TXL 30 |
The secondary beam consists of an inner and an outer purlin. It includes the necessary hardware to join the two parts together.
To achieve a solid connection between the secondary beam and the primary beam, you will need two connectors. Since this beam is compatible with various structures, make sure you purchase the specific connector for your mezzanine by consulting the correspondence table.
|
Mezzanine |
Connector |
|
TXL 32 / TXL 37 |
