Mezzanine TM 10 Colour Black

Cart

Subtotal 0.00 €

Shipping

Taxes 0.00 €

Total 0.00 €

Compare

Call me back! Whatsapp +44 (0)20 3695 5553

from 7:00 to 15:00

Small
- Small
  
  Height between 158cm and 233cm – Ideal for domestic use in small areas: bedrooms, living rooms, storerooms or garages. For loads up to 1400kg.
  
  You can compare S mezzanines.
- Full kits
  
  Loft bed with lateral stairs TS 8
  158cm - 232cm | 3m² - 8m²
  
  Altillo TS 8 con escalera vertical S
  158cm - 232cm | 3m² - 8m²
- Mezzanines
  
  TS 8
  Height: 158cm - 232cm | Area: 3m² - 8m²
  
  TS 5
  Height: 158cm - 233cm | Area: 2.4m² - 4.6m²
  
  TS 4
  Height: 158cm - 232cm | Area: 1m² - 4m²
  
  Truckle bed TS8
  Height: 158cm - 232cm | Area: 3m² - 8m²
- Extensions
  
  TS 8 'A' | TS 8 'B'
  Height: 158cm - 232cm | Area: 3m² - 8m²
  
  TS 5 'A' | TS 5 'B'
  Height: 158cm - 232cm | Area: 2.4m² - 4.6m²
  
  TS 4 'A' | TS 4 'B'
  Height: 158cm - 232cm | Area: 1m² - 4m²
- Stability
  
  Stability Bar S
  
  ‘Z’ Stability Kit S/M
Medium
- Medium
  
  Height between 173cm and 282cm – Ideal for high ceilings and wide areas as offices, big living rooms or lightweight storages. For loads up to 3000kg.
  
  You can compare M mezzanines.
- Full kits
  
  Mezzanine with M straight stairs TM 15
  Height: 173cm - 282cm | Area: 5m² - 15m²
- Mezzanines
  
  TM 15
  Height: 173cm - 282cm | Area: 5m² - 15m²
  
  TM 10
  Height: 173cm - 282cm | Area: 5.5m² - 10m²
  
  TM 7
  Height: 173cm - 282cm | Area: 2.4m² - 7m²
- Extensions
  
  TM 15 'A' | TM 15 'B'
  Height: 173cm - 282cm | Area: 5m² - 15m²
  
  TM 10 'A' | TM 10 'B'
  Height: 173cm - 282cm | Area: 5.5m² - 10m²
  
  TM 7 'A' | TM 7 'B'
  Height: 173cm - 282cm | Area: 2.4m² - 7m²
- Stability
  
  Stability Bar M
  
  ‘Z’ Stability Kit S/M
Large
- Large
  
  Height between 209cm and 343cm – Ideal for very wide areas as commercial premises or warehouses. For loads up to 8500kg.
  
  You can compare L mezzanines.
- Full kits
  
  Mezzanine with L standard stairs TL 30
  Height: 209cm - 343cm | Area: 14m² - 29m²
- Mezzanines
  
  TL 35
  Height: 209cm - 343cm | Area: 14m² - 34m²
  
  TL 30
  Height: 209cm - 343cm | Area: 14m² - 29m²
  
  TL 23
  Height: 209cm - 343cm | Area: 9m² - 23m²
  
  TL 20
  Height: 209cm - 343cm | Area: 7m² - 20m²
- Extensions
  
  TL 35 'A' | TL 35 'B'
  Height: 209cm - 343cm | Area: 14m² - 34m²
  
  TL 30 'A' | TL 30 'B'
  Height: 209cm - 343cm | Area: 14m² - 29m²
  
  TL 23 'A' | TL 23 'B'
  Height: 209cm - 343cm | Area: 9m² - 23m²
  
  TL 20 'A' | TL 20 'B'
  Height: 209cm - 343cm | Area: 7m² - 20m²
- Stability
  
  Stability Bar L
  
  ‘Z’ Stability Kit L
Industrial XL
- Extra Large
  
  Height between 235cm and 381cm – Mezzanines for industrial premises with immediate availability. They allow the use of hand pallet trucks and have a load capacity up to 1000kg/m².
- Full kits
  
  Industrial Mezzanine Kit TXL 32
  Height: 235cm - 381cm | Area: 10m² - 30m²
  
  Industrial Mezzanine XL pack 120 m²
  Height: 235cm - 381cm | Area: 55m² - 120m²
- Mezzanines
  
  TXL 37
  Height: 235cm - 381cm | Area: 16m² - 37m²
  
  TXL 32
  Height: 235cm - 381cm | Area: 10m² - 30m²
  
  TXL 30
  Height: 235cm - 381cm | Area: 23m² - 30m²
  
  TXL 29
  Height: 235cm - 381cm | Area: 11m² - 29m²
  
  TXL 20
  Height: 235cm - 381cm | Area: 7m² - 20m²
- Extensions
  
  TXL 37 'A' | TXL 37 'B'
  Height: 235cm - 381cm | Area: 16m² - 37m²
  
  TXL 32 'A' | TXL 32 'B'
  Height: 235cm - 381cm | Area: 10m² - 30m²
  
  TXL 30 'A' | TXL 30 'B'
  Height: 235cm - 381cm | Area: 23m² - 30m²
  
  TXL 29 'A' | TXL 29 'B'
  Height: 235cm - 381cm | Area: 11m² - 29m²
  
  TXL 20 'A' | TXL 20 'B'
  Height: 235cm - 381cm | Area: 7m² - 20m²
- Stability
  
  Stability Column XL
  
  Stability Bar XL
Stairs
- Stairs for reduced spaces
  
  Straight stairs
  
  Spiral stairs
  
  Industrial alternating tread stairs 63º
  
  Alternating tread stairs 62º
  
  Ladder
  
  Boat ladder
  
  Lateral stairs
  
  Truckel bed straight stairs
- Easily accessible stairs
  
  Standard stairs with landing
  
  Public access stairs 30º
  
  General access stairs 36º
  
  Standard stairs
- Folding stairs
  
  3m Telescopic wooden Ladder
  
  Folding stairs to wall 54º
  
  Folding Stairs to wall 45º S
  
  Telescopic aluminium ladder
- Stair landings
  
  Stair landing
  
  Stair landing extension
- Beam for interior stairs
  
  Beam for interior stairs
- Single parts
  
  View all
Railings
- Standard railings
  
  Railing
  
  Panel railing
  
  4 tubes railing
  
  Rope railing
- Security railings
  
  Public use railing
  
  Railing with safety skirting board
  
  Security railing with plate
- Low railings
  
  Loft bed railing
  
  Low railing
- Extensions
  
  Railing
  
  Panel railing
  
  4 tubes railing
  
  Rope railing
  
  Railing with safety skirting board
  
  Security railing with plate
  
  Public use railing
  
  Loft bed railing
  
  Low railing
- Railings for stairs
  
  Railing flank for lateral stairs
  
  Railing for folding stairs to wall
- Loading gates
  
  Safety pallet gate
Accesories
- Extra accesories
  
  Electrical stair lift kit with remote control
  
  Column protection
  
  UNO hanging bracket
  
  Skylight 400x300mm
  
  View all
- Aesthetic improvements
  
  Self-adhesive mats for folding stairs
  
  50 bolt caps
  
  Tecrostar anti-fingerprint cleaner
  
  Floor finish kit
  
  View all
- Led lighting
  
  LED panel
  
  Two lamp lighting kit
  
  LED strip with magnets
  
  5 m power supply kit for one lamp
  
  View all
- Tools
  
  650w jigsaw
  
  1300w circular saw
  
  Hacksaw and file kit
  
  Drill bit kit
  
  View all
Components
Outlet





Description

Multipurpose and adaptable to any area, this mezzanine allows you to divide the room into two, from a minimum height of 1,70 meters.

It adapts to any situation, from attics to studios and workspaces, thanks to its flexibility. From corners of 5.5 m² to large surfaces of 10 m², there is no need of bricklaying or works.

The Mezzanine TM 10 has all the qualities of a tailored mezzanine with the ease of installation of a removable mezzanine. It supports weights of 200 kg/m² when it is totally extended, having a maximum load capacity of 400 kg/m² installed with the smallest dimensions. The Mezzanine TM 10 can be combined with any Tecrostar railing or stair option to get a unique atmosphere.

The fixation of the mezzanine depends on its configuration and on the place where it is installed.

Our product is totally detachable and reusable. Therefore, it can be considered as movable property. This feature, always depending on each country’s current legislation, allows its use and installation with no need for planning permission.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space, SL is not responsible of the use or inadequate installation of the product.

Data sheet

Reference 21300-N

Type of product: Only Mezzanine
Range: Medium
Compatibility: Medium
Maximum height above the flooring board (cm) (HT): 282
Minimum height above the flooring board (cm) (HT): 173
Available heights above beams (cm) (HV): 171, 177, 189, 183, 195, 201, 207, 213, 219, 225, 232, 238, 244, 250, 256, 262, 268, 274, 280
Total height (cm) (HT): 173, 179, 185, 191, 197, 203, 209, 215, 221, 227, 233, 239, 245, 252, 258, 264, 270, 276, 282
Height-adjustable every (cm): 6,05
Total maximum load (Kg): 1292
Beam height (cm) (HB): 20
Width/Length-adjustable every (cm): 10
Maximum length of the primary beam (cm) (LT): 605
Minimum length of the primary beam (cm) (LT): 455
Maximum length of the secondary beam (cm) (DT): 178
Minimum length of the secondary beam (cm) (DT): 128
Maximum area (m²): 10,77
Minimum area (m²): 5,82
Load capacity in its minimum extension (kg/m²): 400
Load capacity in its maximum extension (kg/m²): 120
Flooring (HF): 18 mm thick European Radiata pine plywood
Material and finish of the structure: Structural steel painted with powder coating
Net weight (Kg): 338
Gross weight (Kg with packaging): 370

FAQs

What does the kit include?

Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

All the beams and columns
The floor panels
All the nuts and bolts
Wall anchors
Assembly manual
Anchors for anchoring the columns to the floor

Personalised phone or email service from our specialists

Is the floor tailored? How does it fit to my dimensions?

The kit includes as many boards as needed to install the mezzanine in its maximum dimensions. To install the mezzanine in smaller dimensions, it is necessary to cut the boards as it is explained in the installation manual included in the mezzanine kit. Cutting the boards is really easy and all the required tools are available at our online store as well.

Is there any other alternative to the wooden floor?

No. Tecrostar does not have a different flooring alternative. However, it is possible to personalize the finish of the floor by adding some accessories on the boards (carpet, platform,...). Check our floor finishes in accessories section. If the customer installs a different floor from the boards provided, it is their responsibility to ensure the resistance of the full mezzanine, since the floor contributes to the stability of the whole.

Can I have two heights?

No, you can’t. At the moment, our mezzanines are available just for a single height although some customers install them on another existing mezzanine. In that case, the resistance of the existing one should be checked.

What load can support the beams if I hang something from them? (E.g. a punching bag)

It depends on the beam type, we need to calculate the corresponding surface load. For example, a secondary beam TM15 supports around 560 kg. You should take into account that if we apply additional loads, a part of the bearing capacity of the beam is being consumed.

If you have any doubt about important additional loads, contact our technical department.

Can I install a Tecrostar mezzanine outdoors?

TecroStar products can be installed outdoors (in the open), provided that the following considerations are taken into account, which define the structural, environmental and material maintenance calculation conditions.

Products with wooden components and load-bearing floors can be installed outdoors or in humid environments when a specific waterproofing treatment for wood is applied and maintenance is carried out on a regular basis.

It is not advisable to install products with electrical components outdoors.

If you want to install Tecrostar products outdoors or in humid environments, we recommend you to request the waterproof treatment that provides additional protection to the steel parts, increasing their durability against those atmospheric conditions that can cause corrosion.

Structural Calculation Considerations

Outdoor installation involves forces due to snow and wind, which depend on the geographical location, altitude of the site, etc. These actions have been taken into account in the calculation, with certain maximum values that must be compared with those of the area where it is installed, to ensure that these limits are not exceeded.

The value of the snow load corresponding to the zone must be subtracted from the use overload supported by the mezzanine to the dimensions that have been installed. As a guide value, TecroStar structures can be considered to withstand a minimum use overload of 200 kg/m², and therefore the load of snow that a mezzanine can withstand outdoors is very high.

The mezzanine can be installed as a canopy outdoors by installing the stability kit, contemplating the case of a complete obstruction when it is placed against a façade, or free if it allows air to pass through its lower part. A wind speed of 100 km/h is taken as a reference. The regulations of each locality must be consulted to check that these limits are not exceeded.

Under no circumstances should the sides of the building be closed, as this implies greater horizontal forces that are not included in the calculation.

The columns of the mezzanine must be fixed to a solid base that resists the actions transmitted by the mezzanine. TecroStar offers guidance as to the type of footing or foundation required under the columns, but it is the customer's responsibility to check the final strength of the terrain.

When the mezzanine is required to be placed on a grass or soil type surface, some type of footing will be necessary. The modular foundation system shown below may be a good solution, although it is up to the client to check it through the technician responsible for the project https://piloedre.es/

Environmental conditions and performance of materials

The metallic steel pieces are lacquered with paints suitable for exteriors. TecroStar structures have a thermosetting polyester polymerised powder coating, with a coating thickness between 60 and 80 microns.

Corrosivity category C2 has been obtained, of medium durability, when submitting the pieces to the tests, according to the criteria of the European Norm EN ISO 12944 of May 1998: "Protection of steel structures against corrosion by means of protective painting systems". Examples of typical environments for corrosivity category C2:

● Interiors: buildings without heating where can be condensations (warehouses, sports centres,…)

● Outdoor: atmospheres with low pollution levels. Mostly, rural regions.

The medium durability of the lacquer covers a period of 5 to 15 years. The standard states that durability is NOT a "warranty period". Durability is a technical consideration that can help the owner establish a maintenance programme. That is, tests are performed for a specified number of hours under uniform conditions applied to smooth surfaces. The reality is that climatic and environmental conditions are very variable.

It is to be expected that after some time the structure requires retouches of painting on small zones, like edges or corners that can present beginning of oxidation and loss of the brightness. It is recommended to polish these areas to remove the rust and then apply the paint. The edges of steel parts are the parts most prone to corrosion and where rust first appears, in fact, these areas are not evaluated in salt spray tests, as the standard does not contemplate them.

TecroStar does not advise the use of metallic parts painted in white for exteriors, since the appearance of rust is appreciated much earlier than in black.

When the visual inspection indicates that paint retouching is required, careful attention should be paid to all edges or corners that may show signs of oxidation and loss of gloss. It is recommended to polish these areas to remove the rust and then apply the paint.

If the mezzanine is to be installed outdoors in a marine or coastal environment, maintenance recommendations should be carried out more frequently, due to the corrosive power produced by the existence of salt and moisture. Try to control the oxidation process to avoid further deterioration. In this case, it is recommended to polish the affected areas to remove the rust and then apply the paint.

The aluminium handrails of the rails do not require any special maintenance, as all of them are subjected to surface treatments that guarantee their outdoor performance (anodised silver, black lacquer or with a wood effect).

The load-bearing floor of TecroStar mezzanines consists of structural plywood panels. It is intended for indoor use in a humid or protected outdoor environment in accordance with EN 636-1-S. The customer must apply a lasur* or specific waterproofing treatment for wood to the floor and to the exposed edges, which protects the surface and prevents water from penetrating into the tongue and groove joints of the panels and affecting the edges.

Likewise, all wood pieces (steps, wooden strips, etc.) must be treated with some type of water-resistant paint or varnish to prevent moisture from penetrating and the material from cracking, and therefore losing its mechanical and aesthetic characteristics.

The wood pieces should also be maintained, checking that the applied surface protections (varnishes or paints) have not deteriorated, and treating them if necessary.

The presence of water in puddles or “ponds” on the mezzanine should be avoided. To that end, the mezzanine should be installed with a slight slope to facilitate the water evacuation and to avoid its accumulation (approximately 2%). This unevenness can be achieved by installing levelling plates under the highest pillars of the structure. Drains can also be created for the same purpose.

* It is a product for outdoor uses that is more appropriate than varnish because it offers a high resistance, does not create a layer on the surface it is applied, controls humidity, gives a waxy finish and provides a wide range of finishes.

Can the mezzanine be installed without columns or removing a column? Attached to walls

No, our mezzanines are sold with columns by default. We cannot guarantee the resistance of walls or corbels and the customer will be responsible if the product is modified in these cases.

Can I install the mezzanine in a sloped floor?

Yes. Provided that the inclination is small, we can use a wedge under the mezzanine columns to level it. If the inclination is too small it might be not necessary at all and the slope might be imperceptible.

Can I install it in a room with trapezoidal or irregular walls?

Yes, you can, because the structure does not need to be in total contact with the wall.

You can adjust the structural floor, working around architectural barriers or irregular surfaces.

When the walls are irregular or when you want to work around a fixed object, the decking can be finished off against the wall

Adjustment from below:

Adjustment from above:

Can I install the mezzanine at a lower or higher height than indicated?

It is possible at lower height but it requires to cut the columns and drill again though. At higher height is not possible. The cut of the columns can be done by the customer or you can order Tecrostar to do it upon request for a quote.

Can it be installed as an extension to an existing mezzanine?

Yes. This is quite common and the results are very good. The telescopic system of the columns enables the height to be adjusted every 6 cm.

Can I install a mezzanine making modifications of it?

You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.

Can the columns be installed moved to the corners?

Yes. The columns can be moved to the corners up to ¼ of the total length of the structure. This feature allows you to work around the walls, switches or furniture you have on site without compromising safety.

Can I add extra columns to distribute the weight?

Yes, you can. However, the maximum load capacity will be unaffected.

How is it installed?

To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accidents.

When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.

You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)

You can find all the tools required to assemble it and tested by Tecrostar in the tools section.

All the models are installed by following these steps:

Pre-assemble the structure on the floor in the desired area.

Raise the outer structure to the desired height

Finish assembling the structure and floor.

Watch video

How long does it take to install?

You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.

TS8 Mezzanine: 3 hours with 2 people

TM15 Mezzanine: 4 hours with 2 people

TL30 Mezzanine: 5 hours with 3 people

The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.

Can I hire the installation service at home?

You can find an installer nearby on the web misterassembler.com.

This website is foreign to Tecrostar. It puts installers and customers in contact, so the price and the responsibility for the installation are the installer, not Tecrostar.

How is the product shipped and received?

Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).

Watch video 1

Watch video 2

How is the package and what are its dimensions?

Depending on your order you can receive different packages: One box for the mezzanines of the S and M ranges or two boxes for L mezzanines.

Length: 239 cm

Width: 112 cm

Height: 54 cm

The stairs can share the box with the mezzanines if they are purchased at the same time or you can have a separate box for the stairs. Check the stairs section.

Watch video

How do I get the product up to my home?

Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.

Can I hire a service to take the material up to my home?

In most cases, you can.

Do I have to ask for a building permit or license to assemble my mezzanine?

No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.

What if the access to the delivery address is complicated?

Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support. If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.

Characteristics of the materials

Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
Structure hardware grade 8.8
Anodized aluminium apt for outdoor use
The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

How can we know the delivery times of our products?

Our delivery times are based on historical statistical data related to Tecrostar experience in the last decade. In spite of the difficulty of providing an exact information, you can check here the approximate data in real time.

Our preparation times of the material can be sometimes affected by:

The shortage and speculation around the raw materials.
The logistic difficulty that implies a product with great volume and its different configurations.
The bank holidays that paralyze our activity.
Personal errors that force us to restart or improve certain processes.
We are human!

Telescopic system

-15%

-15%

Self Adhesive Vinyl Planks Merbau Exotic

Vinyl planks adhesive floor finishing. The sticker side makes easier lay them over the wooden flooring on Tecrostar mezzanines.

70.00 € 59.50 €

View product

Compare

50 Hole Plugs

It consists of 50 domed blanking plugs made of plastic to plug unused holes in the beams of the mezzanine. They snap into the holes easily providing a snug fit. Domed blanking plugs are available in black or white.

2.00 €

View product

Compare

Floor finish kit

This kit includes everything needed to apply a varnish treatment to the floor of your mezzanines. Get a natural, soft, long-lasting and easy to clean finish. The kit includes enough product to varnish a surface of 5 sqm (2 layers). If the surface of your mezzanine is bigger, you will have to add to your order as many additional cans as needed. The varnish is also suitable for the wooden steps of the stairs or for the boat ladder.

57.00 €

View product

Compare

‘A’ Extension TM 10

The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.

The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.

1,640.00 €

View product

Compare

‘B’ Extension TM 10

The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.

The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.

1,708.00 €

View product

Compare