







Reference: 20201-N
Beams to install the stairs inside the mezzanines.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Check the payment and financing facilities that we offer you
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 7 days. Check our delivery times in real time here.
Ask us about the waterproof option.
It consists of 2 small telescopic secondary beams and 4 connectors that allow to adjust the space depending on the stairs model you want to place. The kit includes all the screws required.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
You can choose between several types of stairs:
Straight stairs
Spiral stairs
Ladders
Retractable ladders
Alternating tread stairs
The stairs can be placed in different positions, increasing the possible configurations
Case 1: Exterior stairs, perpendicular to the mezzanine.
Case 2: Interior stairs. You will need a beam for interior stairs.
Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.
Case 4: A different placement to our mezzanines.
Yes, provided that the height matches. All our stairs can be located in any of our structures. As the structures, the stairs are height-adjustable. We have several different types of stairs, to ensure the height compatibility with the selected mezzanine.
Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details
Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.
If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:
Anchor A
References that have this anchor: 30303, 30501, 30401, 31003, 31301, 31102, 35100, 35000, 34001, 30900
Anchor B:
References that have this anchor: 35200, 35300
Anchor C:
References that have this anchor: 30601, 30801
What regulations do our stairs comply with?
In TecroStar there are different types of staircases: some for private use, usually located in small spaces, some for general use, wider and more comfortable, suitable for workplaces or commercial premises.
There are in place many regulations for staircases in the different countries in which TecroStar is present. Therefore, it is difficult to determine whether a staircase type complies with a particular normative.
Our stairs are designed by defining the general criteria for each type of staircase, so that these are well defined and checked against those in the regulations:
However, some regulations also refer to very specific construction parameters and details, which must be interpreted by the customer.
There are very few international standards that cover the design of staircases, one of which is ISO 14122 "Safety of machinery. Permanent means of access to machinery and industrial installations", whose criteria are suitable for our category https://www.tecrostar.com/easily-accessible-stairs . For all other regulations, the general criteria should be verified, which can be easily compared with the data in the Technical Data Sheets. Further details can be obtained from TecroStar.
Defining the intended use of the staircase is basic in most standards. Staircases are generally classified as service or private stairs, as well as general or public use stairs, the latter being more demanding.
If you have a specific regulation that your staircase must comply with, you can ask us and we will try to help you in your decision.
The anchor that joins the stairs to the mezzanine can attach the stairs with 4 or 2 screws. If you choose the configuration of just 2 screws, the stairs can pivot. In any case, the stairs have the same resistance.
Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.
The stairs include the maximum number of steps that are required in their maximum heights. The more the height is reduced, the less steps will be installed. However, you can acquire additional steps as spare parts, the number of steps is designed according to the inclination of each staircase though. An excessive number of steps would reduce the going available for treading, specially important when going down.
Yes, the railing of both sides of the stairs is removable and, therefore, it can be taken off. However, Tecrostar recommends to install it for security and because they provide rigidity to the stairs as well. On the other hand, the stairs include the railing; it is not possible to acquire them without the railing.
For the orders that include just the stairs, the dimensions of the package are:
Length: 235cm
Width: 32cm
Height: 31cm
The weight depends on the model of the stairs. Check the product sheet.
Yes. You will have to acquire the beam for interior stairs.
Check the the table with the specifications of each staircase to get this information.
No, you can’t.
To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accidents.
When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.
You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)
You can find all the tools required to assemble it and tested by Tecrostar in the tools section.
All the models are installed by following these steps:
Pre-assemble the structure on the floor in the desired area.
Raise the outer structure to the desired height
Finish assembling the structure and floor.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
In most cases, you can.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
Our delivery times are based on historical statistical data related to Tecrostar experience in the last decade. In spite of the difficulty of providing an exact information, you can check here the approximate data in real time.
Our preparation times of the material can be sometimes affected by:
The shortage and speculation around the raw materials.
The logistic difficulty that implies a product with great volume and its different configurations.
The bank holidays that paralyze our activity.
Personal errors that force us to restart or improve certain processes.
We are human!
To make installing your mezzanine lighting system easy, Tecrostar offers you this 1 lamp lighting kit, which includes everything you need to safely install the lighting system in less than five minutes without needing any tools or knowledge of electricity.
With the 1 lamp lighting kit you can easily create a pleasant environment any time of the day and improve the look of your mezzanine using a lighting system that also saves energy and is suitable for any beam layout on Tecrostar mezzanines.
This kit includes:
Light your space in an easy and elegant way with the LED strip. This lamp is installed with magnets, without using special tools, to get a pleasant atmosphere anytime and improve the aesthetic of the room.
This lamp works like traditional lamps. Moreover, you can join several strips to increase the illuminated area with a single click.
The LED strip implies a great energy saving as it has a power of 18W and produces 1600 Lumens of brilliance. It can be perfectly located along the beams of Tecrostar mezzanines.
Light your space elegantly with the LED Panel; a recessed lighting that is installed with magnets, without using special tools, to get a pleasant atmosphere anytime. This recessed lighting works like traditional lamps. Should you want to install several panels and control them with a single switch, you just need to connect them to the same electrical circuit.
The LED panel implies a great energy saving as it has a power of 40W and produces 3.000 Lumens of brilliance. Suitable for any beam disposition of Tecrostar mezzanines.
It is not compatible with the remote control.
This accessory helps you to cover the edges of your Tecrostar mezzanine flooring boards (S, M and L ranges) and contributes to improve the aesthetics of the structure. It is particularly indicated to cover the cuts of the perimeter boards, that may have irregularities in some occasions.
It only takes one click to light your space. The LED panel light with remote control is installed with magnets, without using special tools, and illuminates any part of your mezzanine in less than a minute.
This recessed lighting with remote control doesn’t need a switch, it just needs to be connected to the mains. In addition, you can control the temperature and the intensity of the light using the remote control to achieve the desired atmosphere at any time.
The LED panel implies a great energy saving as it has a power of 40W and produces 3600 Lumens of brilliance. It can be perfectly located along the beams of Tecrostar mezzanines.
maniable
facile à installer et à ajuster la cage d'escalier à son gout
Gute Treppeneinbindung
Einfach einzubauen, alles sehr gut.