Real photos of our customers
Mezzanine TS 8
The ideal option to double the available space in rooms and any other location. Turn your stay into a comfortable duplex easily and without works.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 7 days. Check our delivery times in real time here.
Ask us about the waterproof option.
Manageable and light, it turns your stay into two different and useful rooms. Ideal for rooms, lofts, living rooms and daily work spaces. The TS8 doubles its extension from 2 to 8 m² and supports loads from 200 kg/m².
It can be combined with railing of the S range as well as Tecrostar stairs and accessories to get a customized structure. To install the stairs inside the structure, it is necessary to use the Beam for interior Stairs S.
Our product is totally detachable and reusable. Therefore, it can be considered as movable property. This feature, always depending on each country’s current legislation, allows its use and installation with no need for planning permission.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space, SL is not responsible of the use or inadequate installation of the product.
- Type of product
- Only Mezzanine
- Maximum height above the flooring board (cm) (HT)
- Minimum height above the flooring board (cm) (HT)
- Available heights above beams (cm) (HV)
- 159, 165, 171, 177, 183, 189, 195, 201, 207, 213, 219, 225, 232
- Total height (cm) (HT)
- 179, 160, 166, 173, 185, 191, 197, 203, 209, 215, 221, 227, 233
- Height-adjustable every (cm)
- Total maximum load (Kg)
- Beam height (cm) (HB)
- Width/Length-adjustable every (cm)
- Maximum length of the primary beam (cm) (LT)
- Minimum length of the primary beam (cm) (LT)
- Maximum length of the secondary beam (cm) (DT)
- Minimum length of the secondary beam (cm) (DT)
- Maximum area (m²)
- Minimum area (m²)
- Load capacity in its minimum extension (kg/m²)
- Load capacity in its maximum extension (kg/m²)
- Flooring (HF)
- 18 mm thick European Radiata pine plywood
- Material and finish of the structure
- Structural steel painted with powder coating
- Net weight (Kg)
- Gross weight (Kg with packaging)
- All the beams and columns
- The floor panels
- All the nuts and bolts
- Wall anchors
- Assembly manual
- Anchors for anchoring the columns to the floor
- The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
- Structure hardware grade 8.8
- Anodized aluminium apt for outdoor use
- The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
- Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.
The shortage and speculation around the raw materials.
The logistic difficulty that implies a product with great volume and its different configurations.
The bank holidays that paralyze our activity.
Personal errors that force us to restart or improve certain processes.
We are human!
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
The kit includes as many boards as needed to install the mezzanine in its maximum dimensions. To install the mezzanine in smaller dimensions, it is necessary to cut the boards as it is explained in the installation manual included in the mezzanine kit. Cutting the boards is really easy and all the required tools are available at our online store as well.
No. Tecrostar does not have a different flooring alternative. However, it is possible to personalize the finish of the floor by adding some accessories on the boards (carpet, platform,...). Check our floor finishes in accessories section. If the customer installs a different floor from the boards provided, it is their responsibility to ensure the resistance of the full mezzanine, since the floor contributes to the stability of the whole.
No, you can’t. At the moment, our mezzanines are available just for a single height although some customers install them on another existing mezzanine. In that case, the resistance of the existing one should be checked.
It depends on the beam type, we need to calculate the corresponding surface load. For example, a secondary beam TM15 supports around 560 kg. You should take into account that if we apply additional loads, a part of the bearing capacity of the beam is being consumed.
If you have any doubt about important additional loads, contact our technical department.
TecroStar products can be installed outdoors (in the open), provided that the following considerations are taken into account, which define the structural, environmental and material maintenance calculation conditions.
Structural Calculation Considerations
Outdoor installation involves forces due to snow and wind, which depend on the geographical location, altitude of the site, etc. These actions have been taken into account in the calculation, with certain maximum values that must be compared with those of the area where it is installed, to ensure that these limits are not exceeded.
The value of the snow load corresponding to the zone must be subtracted from the use overload supported by the mezzanine to the dimensions that have been installed. As a guide value, TecroStar structures can be considered to withstand a minimum use overload of 200 kg/m², and therefore the load of snow that a mezzanine can withstand outdoors is very high.
The mezzanine can be installed as a canopy outdoors by installing the stability kit, contemplating the case of a complete obstruction when it is placed against a façade, or free if it allows air to pass through its lower part. A wind speed of 100 km/h is taken as a reference. The regulations of each locality must be consulted to check that these limits are not exceeded.
Under no circumstances should the sides of the building be closed, as this implies greater horizontal forces that are not included in the calculation.
The columns of the mezzanine must be fixed to a solid base that resists the actions transmitted by the mezzanine. TecroStar offers guidance as to the type of footing or foundation required under the columns, but it is the customer's responsibility to check the final strength of the terrain.
When the mezzanine is required to be placed on a grass or soil type surface, some type of footing will be necessary. The modular foundation system shown below may be a good solution, although it is up to the client to check it through the technician responsible for the project https://piloedre.es/
Environmental conditions and performance of materials
The metallic steel pieces are lacquered with paints suitable for exteriors. TecroStar structures have a thermosetting polyester polymerised powder coating, with a coating thickness between 60 and 80 microns.
Corrosivity category C2 has been obtained, of medium durability, when submitting the pieces to the tests, according to the criteria of the European Norm EN ISO 12944 of May 1998: "Protection of steel structures against corrosion by means of protective painting systems". Examples of typical environments for corrosivity category C2:
● Interiors: buildings without heating where can be condensations (warehouses, sports centres,…)
● Outdoor: atmospheres with low pollution levels. Mostly, rural regions.
The medium durability of the lacquer covers a period of 5 to 15 years. The standard states that durability is NOT a "warranty period". Durability is a technical consideration that can help the owner establish a maintenance programme. That is, tests are performed for a specified number of hours under uniform conditions applied to smooth surfaces. The reality is that climatic and environmental conditions are very variable.
It is to be expected that after some time the structure requires retouches of painting on small zones, like edges or corners that can present beginning of oxidation and loss of the brightness. It is recommended to polish these areas to remove the rust and then apply the paint. The edges of steel parts are the parts most prone to corrosion and where rust first appears, in fact, these areas are not evaluated in salt spray tests, as the standard does not contemplate them.
TecroStar does not advise the use of metallic parts painted in white for exteriors, since the appearance of rust is appreciated much earlier than in black.
When the visual inspection indicates that paint retouching is required, careful attention should be paid to all edges or corners that may show signs of oxidation and loss of gloss. It is recommended to polish these areas to remove the rust and then apply the paint.
If the mezzanine is to be installed outdoors in a marine or coastal environment, maintenance recommendations should be carried out more frequently, due to the corrosive power produced by the existence of salt and moisture. Try to control the oxidation process to avoid further deterioration. In this case, it is recommended to polish the affected areas to remove the rust and then apply the paint.
The aluminium handrails of the rails do not require any special maintenance, as all of them are subjected to surface treatments that guarantee their outdoor performance (anodised silver, black lacquer or with a wood effect).
The load-bearing floor of TecroStar mezzanines consists of structural plywood panels. It is intended for indoor use in a humid or protected outdoor environment in accordance with EN 636-1-S. The customer must apply a lasur* or specific waterproofing treatment for wood to the floor and to the exposed edges, which protects the surface and prevents water from penetrating into the tongue and groove joints of the panels and affecting the edges.
Likewise, all wood pieces (steps, wooden strips, etc.) must be treated with some type of water-resistant paint or varnish to prevent moisture from penetrating and the material from cracking, and therefore losing its mechanical and aesthetic characteristics.
The wood pieces should also be maintained, checking that the applied surface protections (varnishes or paints) have not deteriorated, and treating them if necessary.
The presence of water in puddles or “ponds” on the mezzanine should be avoided. To that end, the mezzanine should be installed with a slight slope to facilitate the water evacuation and to avoid its accumulation (approximately 2%). This unevenness can be achieved by installing levelling plates under the highest pillars of the structure. Drains can also be created for the same purpose.
* It is a product for outdoor uses that is more appropriate than varnish because it offers a high resistance, does not create a layer on the surface it is applied, controls humidity, gives a waxy finish and provides a wide range of finishes.
No, our mezzanines are sold with columns by default. We cannot guarantee the resistance of walls or corbels and the customer will be responsible if the product is modified in these cases.
Yes. Provided that the inclination is small, we can use a wedge under the mezzanine columns to level it. If the inclination is too small it might be not necessary at all and the slope might be imperceptible.
Yes, you can, because the structure does not need to be in total contact with the wall.
You can adjust the structural floor, working around architectural barriers or irregular surfaces.
When the walls are irregular or when you want to work around a fixed object, the decking can be finished off against the wall
Adjustment from below:
Adjustment from above:
It is possible at lower height but it requires to cut the columns and drill again though. At higher height is not possible. The cut of the columns can be done by the customer or you can order Tecrostar to do it upon request for a quote.
Yes. This is quite common and the results are very good. The telescopic system of the columns enables the height to be adjusted every 6 cm.
You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.
Yes. The columns can be moved to the corners up to ¼ of the total length of the structure. This feature allows you to work around the walls, switches or furniture you have on site without compromising safety.
Yes, you can. However, the maximum load capacity will be unaffected.
To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accidents.
When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.
You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)
You can find all the tools required to assemble it and tested by Tecrostar in the tools section.
All the models are installed by following these steps:
Pre-assemble the structure on the floor in the desired area.
Raise the outer structure to the desired height
Finish assembling the structure and floor.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.
TS8 Mezzanine: 3 hours with 2 people
TM15 Mezzanine: 4 hours with 2 people
TL30 Mezzanine: 5 hours with 3 people
The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
You can find an installer nearby on the web misterassembler.com.
This website is foreign to Tecrostar. It puts installers and customers in contact, so the price and the responsibility for the installation are the installer, not Tecrostar.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Depending on your order you can receive different packages: One box for the mezzanines of the S and M ranges or two boxes for L mezzanines.
Length: 239 cm
Width: 112 cm
Height: 54 cm
The stairs can share the box with the mezzanines if they are purchased at the same time or you can have a separate box for the stairs. Check the stairs section.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
In most cases, you can.
No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.
Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support. If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
Our delivery times are based on historical statistical data related to Tecrostar experience in the last decade. In spite of the difficulty of providing an exact information, you can check here the approximate data in real time.
Our preparation times of the material can be sometimes affected by:
You might also like
Rioja Hammock chair is handmade in Spain. It has been designed for your home with high-quality materials and a comfortable structure which adapts to the body. The Hammock chair consists of: hammock’s seat, UNO Hanging bracket and a carabiner.
Allows the light through to the lower part of the mezzanine and it also permits to walk on it.
It is really easy to install. You just have to make a hole in the desired position of the floor of your Tecrostar mezzanine and, after that, place both the frame and the glass.
It consists of softwood (MDF) battens that are thin and light, with 50x15mm rectangular section and 2m length that allows an easy installation of any kind of false ceiling.
The battens should be installed against the direction of the mezzanine beams and leave a gap between them of 0.5m. They should be fixed to the beams using the included self-drilling screws. Sometimes the battens may need to be cut with a saw to fit the dimensions of the mezzanine.
It only takes one click to light your space. The LED panel light with remote control is installed with magnets, without using special tools, and illuminates any part of your mezzanine in less than a minute.
This recessed lighting with remote control doesn’t need a switch, it just needs to be connected to the mains. In addition, you can control the temperature and the intensity of the light using the remote control to achieve the desired atmosphere at any time.
The LED panel implies a great energy saving as it has a power of 40W and produces 3600 Lumens of brilliance. It can be perfectly located along the beams of Tecrostar mezzanines.
Customers who bought this product also bought:
Light your space in an easy and elegant way with the LED strip. This lamp is installed with magnets, without using special tools, to get a pleasant atmosphere anytime and improve the aesthetic of the room.
This lamp works like traditional lamps. Moreover, you can join several strips to increase the illuminated area with a single click.
The LED strip implies a great energy saving as it has a power of 18W and produces 1600 Lumens of brilliance. It can be perfectly located along the beams of Tecrostar mezzanines.
Metallic structure with wooden floor, without construction work or bricklaying. A large, strong, robust mezzanine that adapts to homes, businesses and offices. Can be combined with any Tecrostar stairs or accessories.
Load capacity from 200 kg per square meter considering the maximum dimensions of the mezzanine. Reducing the measurements of the mezzanine, the load capacity increases. Not suitable for pallet-truck circulation due to the point load they trans.
It consists of 50 domed blanking plugs made of plastic to plug unused holes in the beams of the mezzanine. They snap into the holes easily providing a snug fit. Domed blanking plugs are available in black or white.
The standard stairs are height-adjustable to access Tecrostar structures. They can also be used independently in other places, thanks to the very versatile anchorage system.
These stairs can be set up inside the mezzanine, using the beam for interior stairs, to increase the usable space and to avoid its extension beyond the mezzanine.
3 other products in the same category:
Increase the usable surface of a small room with the TS5. Manageable, light and sturdy; this mezzanine allows to take advantage of the space in rooms, storage rooms, balconies and stores.
It is ideal to make the best of small spaces with high ceilings. The Mezzanine TS 4 is the smallest and most versatile of all Tecrostar ranges.
The surface of the mezzanine varies from 1 m² to 4 m² and it resists up to 700 kg. A comfortable and affordable option to take advantage of the available space in a room or a small business.
It is ideal for small rooms where you want to increase the usable surface. Tecrostar Truckle Bed is a metallic structure, light and easy to install without construction works or modifying the walls.
Unlike the other Tecrostar products, the columns of this structure are not height-adjustable, but it remains versatile since its width and length can be adapted.
Wir haben die Lagerbühne als Hochbett und Spielbereich für unsere Tochter gekauft. Lieferung und Aufbau waren problemlos, die Qualität überzeugt.
Nous cherchions une mezzanine qui puisse s’adapter à une chambre d’enfant toute ne longueur et ainsi dissocier l’espace nuit de l’espace « jeux ». Elle est parfaite, de très bonne qualité et réglable aux dimensions que l’on souhaite.
Eine tolle Möglichkeit eine Maisonette-Wohnung zu zaubern zum günstigen Preis.
Produit de très bonne qualité, facile à monter.
Livraison dans les temps annoncés.
Très content de mon achat.
Perfecto ha quedado genial, todo como dice en la web
Robusto y elegante
Es perfecto para espacios reducidos por su versatilidad y robustez.
Très satisfaits de notre achat
J'en profite pour vous dire que nous avons monté notre mezzanine, nous sommes très satisfaits de notre achat : très bonne qualité, notice de montage claire, et service client réactif !
Wir können und werden Sie unbedingt weiterempfehlen.
wir haben 2 Lagerbühnen mit Wendeltreppe bestellt, zügig erhalten und aufgebaut. Unsere Kinder nutzen die Lagerbühne als Hochbett sowie als
Rückzugs- und Spielfläche und sind komplett begeistert. Das Produkt - in der bestellten Kombination - ist fantastisch. Wir sind restlos überzeugt. Der Aufbau hat etwas gedauert, war aber kein Problem.
Herzlichen Dank für dieses tolle Angebot. Wir können und werden Sie unbedingt weiterempfehlen.
Everyone loved the mezzanine
Everyone that viewed the apartment loved the mezzanine and it added a lot of value to the selling price of the apartment. I am an architect and really enjoyed the process of planning the mezzanine and I also built it myself with the help from a friend.