Reference: 20500-N
The Stair Landing Extension S allows to increase the surface in the direction of the primary beam, thus extending the length from 85 cm to 145 cm. The width is still the same as the size range of the Stair Landing S.
Free delivery
Only when total amount exceeds 1000€ (TAX excl.).
Several methods of payment
Credit card, bank transfer, PayPal, check...
Special conditions for your business
Check the payment and financing facilities that we offer you
Talk with a specialist. Call to 020 3695 5553
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
We do deliver worldwide
Dispatched in 5 days. Check our delivery times in real time here.
Waterproof
Ask us about the waterproof option.
The columns of the XL and L mezzanines are square shaped and are made of structural-quality materials. Consequently, they have a fabrication mark related to the traceability which indicates the heat number, steel type…
The stairs are height-adjustable, so, they are compatible with any Tecrostar mezzanine and other surfaces, provided that the HV matches that of the mezzanine to which it is to be anchored.
For greater versatility, the stairs adapt to different space configurations. They can be placed on either side of the mezzanine, either perpendicular or parallel to the beam. You can also use a stair landing to make access easier.
You can install them inside the mezzanine using the beam for interior stairs of the same range as the structure.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
The stairs can be placed in different positions, increasing the possible configurations
Yes, our stairs are compatible with other ranges, provided that the height of the staircase matches the height of the mezzanine or surface to be reached.
In our online shop you will find a wide range of staircase models with different heights. This allows you to choose the one that best suits your needs and specific height.
If you wish to install a staircase in XL mezzanines, it is necessary to purchase the Adapter for accessories, which will allow you to integrate it properly.
Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details
Yes. They can be installed on a surface that is not a Tecrostar surface.
Wall anchors for concrete or brick are used to fix staircases to walls made of these materials.
The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.
If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:
What regulations do our stairs comply with?
In TecroStar there are different types of staircases: some for private use, usually located in small spaces, some for general use, wider and more comfortable, suitable for workplaces or commercial premises.
There are in place many regulations for staircases in the different countries in which TecroStar is present. Therefore, it is difficult to determine whether a staircase type complies with a particular normative.
Our stairs are designed by defining the general criteria for each type of staircase, so that these are well defined and checked against those in the regulations:
However, some regulations also refer to very specific construction parameters and details, which must be interpreted by the customer.
There are very few international standards that cover the design of staircases, one of which is ISO 14122 "Safety of machinery. Permanent means of access to machinery and industrial installations", whose criteria are suitable for our category https://www.tecrostar.com/easily-accessible-stairs . For all other regulations, the general criteria should be verified, which can be easily compared with the data in the Technical Data Sheets. Further details can be obtained from TecroStar.
Defining the intended use of the staircase is basic in most standards. Staircases are generally classified as service or private stairs, as well as general or public use stairs, the latter being more demanding.
If you have a specific regulation that your staircase must comply with, you can ask us and we will try to help you in your decision.
The anchor that joins the stairs to the mezzanine can attach the stairs with 4 or 2 screws. If you choose the configuration of just 2 screws, the stairs can pivot. In any case, the stairs have the same resistance.
Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.
The stairs include the maximum number of steps that are required in their maximum heights. The more the height is reduced, the less steps will be installed. However, you can acquire additional steps as spare parts, the number of steps is designed according to the inclination of each staircase though. An excessive number of steps would reduce the going available for treading, specially important when going down.
Yes, the railing of both sides of the stairs is removable and, therefore, it can be taken off. However, we recommends to install it for security and because they provide rigidity to the stairs as well.
On the other hand, the stairs include the railing; it is not possible to acquire them without the railing.
Yes. You will have to acquire the beam for interior stairs.
Check the the table with the specifications of each staircase.
No, you can’t.
At least two adults are required to install Tecrostar mezzanines, (they do not need to be DIY professionals). It is recommended to use safety equipment such as gloves, boots, etc., to avoid any accidents.
For the mezzanine floors in the L and XL range, a scaffolding or ladder system may be required for work at height and manual or electric lifting equipment for the primary beams, especially if the structure is over 3 m high. All other ranges are easily lifted by hand.
You will need the following tools to install the mezzanines: tape measure, a spanner set for nuts and bolts and a screwdriver (an electric screwdriver makes the job much easier), a spirit level, hammer, drill and a cutting tool for the board (handsaw, jigsaw, circular saw...).
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L Range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
To determine the delivery date, it is important to understand the various stages your order goes through, as well as the dispatch and shipping time concepts.
- When we receive your order request, we review it to check the compatibility between products (ranges, colours...).
Once we can verify that everything is correct, your order gets APPROVED (usually within 1 working day).
- As soon as we start preparing your order in the warehouse you will receive an automatic email. At this moment you can check that the status has changed to PROCESSING IN PROGRESS. This is when we carefully handle and package each product so that everything arrives in perfect condition.
Dispatch time corresponds to the period comprised from the order approval to the time this leaves our facilities, which depends on both our team and internal processes. We are committed to working towards keeping it to the possible minimum (5 working days).
-When everything is PREPARED AND READY TO BE SHIPPED, we hand over your order to the transport agency and the order status changes to SHIPPED.
We will send you an email where you will find useful information and recommendations about the delivery process.
As we distribute our products all over the world, we work with different transport companies external to Tecrostar. So that you can enjoy your order as soon as possible, we assess the available options and choose the fastest and with the best conditions offered in each case.
We do our best to give you a delivery estimate, but once the goods leave our premises, the shipping time depends solely on the carrier. Please note that there are external factors that may affect the shipping time, such as the geographical location, unforeseen weather conditions or Customs clearance procedures. As an example, transit time for Zone A countries usually varies from 3 to 7 working days.
For approximate shipping times to other countries please contact us.
If you choose the waterproof or RAL personalised colour options, please note that the delivery of your order will take longer as metal parts will need additional treating or painting.
The Stair Landing S, for the upper landing of the stairs, is useful when you want to place the stairs parallel to one side of the mezzanine and outside it, as shown in the picture below.
Made of high quality steel, the Tecrostar spiral stairs are a winning choice if you are looking for a sturdy and safe staircase able to fit in tight spaces. It guarantees a comfortable user experience.
In addition, it includes a side railing and steel rungs that offer a firm grip when ascending and descending.
The Straight Stairs are the perfect solution for reduced spaces thanks to their versatility and ease of installation. With the option to adjust its height, these become the best choice to optimise the use of the available space in homes, work areas, garages, warehouses and commercial premises.
The Stair Landing S, for the upper landing of the stairs, is useful when you want to place the stairs parallel to one side of the mezzanine and outside it, as shown in the picture below.
The Stair Landing Extension S allows to increase the surface in the direction of the primary beam, thus extending the length from 85 cm to 145 cm. The width is still the same as the size range of the Stair Landing S.
