



Reference: 70200-B
The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 7 days. Check our delivery times in real time here.
Ask us about the waterproof option.
The "B" extension of the structure includes two double columns adjustable in height, whose capital allows the support of primary beams on both sides. The two double columns replace the single columns of the initial module, which are repositioned at the end of the extension module. It comes with the same length-adjustable beams. Also included is the load-bearing floor of structural boards to cover the new surface.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space, SL is not responsible of the use or inadequate installation of the product.
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
Yes. They have the exact same specifications as the initial structure.
Yes, you can add an extension to an existing mezzanine. You do not need to buy both structures at the same time.
No, the extension cannot be integrated and share columns. However, structures can be placed side by side and achieve continuity of the floor but you will not save any columns and there will be two columns together at the joints.
To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accidents.
When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.
You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)
You can find all the tools required to assemble it and tested by Tecrostar in the tools section.
All the models are installed by following these steps:
Pre-assemble the structure on the floor in the desired area.
Raise the outer structure to the desired height
Finish assembling the structure and floor.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.
TS8 Mezzanine: 3 hours with 2 people
TM15 Mezzanine: 4 hours with 2 people
TL30 Mezzanine: 5 hours with 3 people
The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
You can find an installer nearby on the web misterassembler.com.
This website is foreign to Tecrostar. It puts installers and customers in contact, so the price and the responsibility for the installation are the installer, not Tecrostar.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Depending on your order you can receive different packages: One box for the mezzanines of the S and M ranges or two boxes for L mezzanines.
Length: 239 cm
Width: 112 cm
Height: 54 cm
The stairs can share the box with the mezzanines if they are purchased at the same time or you can have a separate box for the stairs. Check the stairs section.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.
Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support. If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
It is ideal to make the best of small spaces with high ceilings. The Mezzanine TS 4 is the smallest and most versatile of all Tecrostar ranges.
The surface of the mezzanine varies from 1 m² to 4 m² and it resists up to 700 kg. A comfortable and affordable option to take advantage of the available space in a room or a small business.
-5%
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
The Stair Landing S, for the upper landing of the stairs, is useful when you want to place the stairs parallel to one side of the mezzanine and outside it, as shown in the picture below.
It only takes one click to light your space. The LED panel light with remote control is installed with magnets, without using special tools, and illuminates any part of your mezzanine in less than a minute.
This recessed lighting with remote control doesn’t need a switch, it just needs to be connected to the mains. In addition, you can control the temperature and the intensity of the light using the remote control to achieve the desired atmosphere at any time.
The LED panel implies a great energy saving as it has a power of 40W and produces 3600 Lumens of brilliance. It can be perfectly located along the beams of Tecrostar mezzanines.
The wooden ladder S is made of high quality beech wood giving a natural look while protecting the wood's surface. The incline of the ladder is 80º. It is compatible with S range. The ladder is adjustable in height. When the height of the structure is equal to or less than 233cm, the ladder can be easily adapted cutting their stringpieces along the marks they include. The ladder can be installed on either side of the structure, or even install it inside the structure.
It is ideal to make the best of small spaces with high ceilings. The Mezzanine TS 4 is the smallest and most versatile of all Tecrostar ranges.
The surface of the mezzanine varies from 1 m² to 4 m² and it resists up to 700 kg. A comfortable and affordable option to take advantage of the available space in a room or a small business.
This extra piece allows to increase the standard flight of the board from 10cm to 30cm. It is used for cases where the loft is far from the wall and we want the board to reach it, in order to make the most of the space and finish the wood against the wall. This piece is fixed to the wall.
-5%
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
-5%
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
The perfect combination of the modern mezzanine and the loft bed. A big double bunk bed with free space underneath it. It converts small rooms into comfortable and functional duplexes with two areas, without works or walls.
To install the mezzanine without works no additional accessories are required, as the kit comes with everything you need.
The Stability Bar is needed when the mezzanine cannot be fixed to two or more walls.
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
The ‘Z’ Stability Kit is a bracing system formed by several stabilizer bars that are placed in one of the sides of the mezzanine.
It is specially designed for those situations in which the mezzanine cannot be attached to any wall or the pillars cannot be fixed to the existing floor.
It is ideal to make the best of small spaces with high ceilings. The Mezzanine TS 4 is the smallest and most versatile of all Tecrostar ranges.
The surface of the mezzanine varies from 1 m² to 4 m² and it resists up to 700 kg. A comfortable and affordable option to take advantage of the available space in a room or a small business.
Increase the usable surface of a small room with the TS5. Manageable, light and sturdy; this mezzanine allows to take advantage of the space in rooms, storage rooms, balconies and stores.
-5%
Mezzanine kit with stairs and railing. The perfect option to divide any small room into two: rooms, offices, storage areas...
-5%
The ideal option to double the available space in rooms and any other location. Turn your stay into a comfortable duplex easily and without works.
-5%
It is ideal for small rooms where you want to increase the usable surface. Tecrostar Truckle Bed is a metallic structure, light and easy to install without construction works or modifying the walls.
Unlike the other Tecrostar products, the columns of this structure are not height-adjustable, but it remains versatile since its width and length can be adapted.
-5%
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
-5%
The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.