



Good news - WE'RE REDUCING OUR PRICES! We further enhance our commitment, lower the rates and implement discounts. x
Reference: 70500-B
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Check the payment and financing facilities that we offer you
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 7 days. Check our delivery times in real time here.
Ask us about the waterproof option.
The "A" extension of the structure includes two simple columns adjustable in height, the same as those of the initial module, which are placed at the end of the extension module. It has the same length-adjustable beams, although with one less secondary beam, as the last one of the previous module is used. It also includes the load-bearing floor of structural boards to cover the new surface.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
Yes. They have the exact same specifications as the initial structure.
Yes, you can add an extension to an existing mezzanine. You do not need to buy both structures at the same time.
No, the extension cannot be integrated and share columns. However, structures can be placed side by side and achieve continuity of the floor but you will not save any columns and there will be two columns together at the joints.
To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accidents.
When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.
You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)
You can find all the tools required to assemble it and tested by Tecrostar in the tools section.
All the models are installed by following these steps:
Pre-assemble the structure on the floor in the desired area.
Raise the outer structure to the desired height
Finish assembling the structure and floor.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.
TS8 Mezzanine: 3 hours with 2 people
TM15 Mezzanine: 4 hours with 2 people
TL30 Mezzanine: 5 hours with 3 people
The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
You can find an installer nearby on the web misterassembler.com.
This website is foreign to Tecrostar. It puts installers and customers in contact, so the price and the responsibility for the installation are the installer, not Tecrostar.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Depending on your order you can receive different packages: One box for the mezzanines of the S and M ranges or two boxes for L mezzanines.
Length: 239 cm
Width: 112 cm
Height: 54 cm
The stairs can share the box with the mezzanines if they are purchased at the same time or you can have a separate box for the stairs. Check the stairs section.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.
Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support. If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
-5%
Pearl is the perfect portable LED lamp to illuminate and create different atmospheres within the Tecrostar mezzanines of the S and M ranges. And best of all: wireless! Made of pearl white finished bioplastic.
Due to its small format, adaptability and warmth, it is ideal for the lower floor of those TECRO mezzanines that do not have access to a socket. It houses a battery with 6 hours of autonomy at full power after charge. The control allows you to regulate the intensity and program the device switch off.
Decorative, minimalist and easy to install railing. It is made from high-quality steel and braided rope that provides greater safety. It is an accessory for domestic use that allows the ropes to be placed in different ways to achieve the design that best adapts to the room.
The kit includes three steel posts, rope and screws.
The adjustable metal railing is a protection device. Its main advantage lies in the possibility of adjusting its height to the needs of each project by means of the telescopic system.
Modular, minimalist and easy to install railing. Made of high-quality steel, it can be combined with various enclosure panels. Provides elegance and safety. Modular railing: 80cm high and up to 200cm long.
The kit includes three steel posts and screws for fixing to the mezzanine. The panels are not included as part of this kit.
The folding stairs to wall are the ideal solution when you need the stairs flush against wall, but there is not too much space. Thanks to their turning system they are folded and collected, taking the minimum space that possible allowing to use it as a transit area.
Made of high quality steel, the Tecrostar spiral stairs are a winning choice if you are looking for a sturdy and safe staircase able to fit in tight spaces. It guarantees a comfortable user experience.
In addition, it includes a side railing and steel rungs that offer a firm grip when ascending and descending. It adapts to any surface, which means it can be installed on Tecrostar mezzanines or in any other location. Lacquered finish in white, black or custom RAL.
Metallic railing with aluminium handrails, designed to be used in a side of the folding stairs to wall, for both the 45º and 54º models.
It is installed in the side that is not flush against wall.
Rioja Hammock chair is handmade in Spain. It has been designed for your home with high-quality materials and a comfortable structure which adapts to the body. The Hammock chair consists of: hammock’s seat, UNO Hanging bracket and a carabiner.
It is ideal to make the best of small spaces with high ceilings. The Mezzanine TS 4 is the smallest and most versatile of all Tecrostar ranges.
The surface of the mezzanine varies from 1 m² to 4 m² and it resists up to 700 kg. A comfortable and affordable option to take advantage of the available space in a room or a small business.
-4%
The perfect combination of the modern mezzanine and the loft bed. A big double bunk bed with free space underneath it. It converts small rooms into comfortable and functional duplexes with two areas, without works or walls.
To install the mezzanine without works no additional accessories are required, as the kit comes with everything you need.
The ideal option to double the available space in rooms and any other location. Turn your stay into a comfortable duplex easily and without works.
The Stability Bar is needed when the mezzanine cannot be fixed to two or more walls.
The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
It is ideal for small rooms where you want to increase the usable surface. Tecrostar Truckle Bed is a metallic structure, light and easy to install without construction works or modifying the walls.
Unlike the other Tecrostar products, the columns of this structure are not height-adjustable, but it remains versatile since its width and length can be adapted.
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
The ‘Z’ Stability Kit is a bracing system formed by several stabilizer bars that are placed in one of the sides of the mezzanine.
It is specially designed for those situations in which the mezzanine cannot be attached to any wall or the pillars cannot be fixed to the existing floor.
The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
Increase the usable surface of a small room with the TS5. Manageable, light and sturdy; this mezzanine allows to take advantage of the space in rooms, storage rooms, balconies and stores.
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
-4%
Mezzanine kit with stairs and railing. The perfect option to divide any small room into two: rooms, offices, storage areas...
The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.