STRAIGHT STAIRS / SPIRAL STAIRS / VERTICAL STAIRS / BOAT LADDER / LATERAL STAIRS / STRAIGHT STAIRS / JAPANESE / TRUCKLE BED / ALTERNATING TREAD STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
Height: From 235cm to 381cm
SURFACE: From 7m2 to 37m2
Height: From 235cm to 381cm
Surface: From 7m2 to 37m2
* All stairs can be installed outside our mezzanines.
STANDARD / 4 TUBES / PANEL / ROPES / EXTENSIONS
PUBLIC ACCESS / SAFETY SKIRTING BOARD / WITH PLATE / SLAT RAILING WITH PLATE / EXTENSIONS /
LOFT BED / LOW
SAFETY PALLET GATE / DOUBLE-HINGED GATE / DOUBLE-HINGED GATE WITH SAFETY ZONE
LATERAL STAIRS / FOLDING STAIRS TO WALL
* All railings can be installed outside our mezzanines
Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.
Reference: 83120
HYDRO structural chipboard (humid environment) with P5 quality seal, tongue and groove on all 4 sides. It is used as the load-bearing floor of Tecrostar industrial mezzanines. To be installed perpendicular to the secondary beams.
Length: 2410 mm
Width: 910 mm
Thickness: 35 mm
Compatible with XL range.
Calculate how many boards are needed. Introduce the dimensions in mm :
TP: Distance along the primary beams.
TS: Distance along the secondary beams.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.
You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
Yes, the mezzanine floor is included.
For the S, M and L ranges we use 18 mm pine plywood structural panels, with tongue and groove joints on all four sides.
In the XL range, we use P5 HYDRO high-density particle board structural panels, with tongue and groove joints on all four sides and 35 mm thick.
If you want to install your mezzanine outdoors and take care of the floor, we recommend installing the Outdoor Decking. This product is placed over the flooring of the mezzanine, making it a suitable option for outdoor use. It is the ideal waterproof solution to protect the wood flooring and prolong the life of your outdoor mezzanine. In this way, you can create multifunctional spaces such as pergolas, porches, terraces or carports.
The kit includes as many boards as needed to install the mezzanine in its maximum dimensions.
To install the mezzanine in smaller dimensions, it is necessary to cut the boards as it is explained in the installation manual included in the mezzanine kit.
No. Tecrostar does not have a different flooring alternative. However, it is possible to personalize the finish of the floor by adding some accessories on the boards (carpet, platform,...). Check our floor finishes in accessories section. If the customer installs a different floor from the boards provided, it is their responsibility to ensure the resistance of the full mezzanine, since the floor contributes to the stability of the whole.
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.
Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.The heaviest components are the primary beams from the L Range (39 kg), the rest of the ranges are considerably lighter (12kg).The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
Plywood board with tongue-and-groove joints in its four sides. It used as the bearing floor of Tecrostar mezzanines, installing it perpendicular to the secondary beams.
Plywood board with tongue-and-groove joints in its four sides. It used as the bearing floor of Tecrostar mezzanines, installing it perpendicular to the secondary beams.
Outdoor decking is laid on top of your mezzanine flooring, creating a product suitable for outdoor use. The perfect waterproof solution to protect the wood flooring of your outdoor mezzanine. This way you can create pergolas, porches, terraces or carports.
Each unit consists of the material necessary to form 1m². It includes a waterproof tarpaulin, battens and pine slats treated in Autoclave IV and screws.
This product, combined with the Waterproof Steel Treatment option for the metal parts, guarantees a durable and resistant mezzanine floor outdoors.
If you don't know how many metres you need, you can calculate it here. Don't forget to add it to your cart!
HYDRO structural chipboard (humid environment) with P5 quality seal, tongue and groove on all 4 sides. It is used as the load-bearing floor of Tecrostar industrial mezzanines. To be installed perpendicular to the secondary beams.
