






Reference: 40202-B
Modular railing made of steel and top-quality beech wood with a natural finish, ideal for installations where there is not enough space in height and a railing is required. This railing is very practical for placing a bed on top of a Tecrostar mezzanine.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 7 days. Check our delivery times in real time here.
Ask us about the waterproof option.
Railing with 37cm high handrail and up to 200cm long, can be installed on any of the Tecrostar mezzanines in the S range. Its installation is easy and without the need for any building work, it just needs to be fixed to the mezzanine.
The kit consists of three steel posts finished with electrostatic paint, two slats of top- quality beech wood with a natural finish and the necessary screws. You can reduce the length of the railing by placing the posts closer together. You can also extend it with the corresponding railing extension kits.
Check compatibility with other ranges or structures.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space, SL is not responsible of the use or inadequate installation of the product.
No, they are not. However, there are other possible combinations between ranges, in which the performance and configuration of the standard product changes (see diagram).
Low railing:
Compatible with mezzanines of the S, M and L ranges. To go ahead with the installation, you must purchase one angular strut from the corresponding mezzanine range for each railing post.
Compatible with the mezzanines of the XL range. To go ahead with the installation, you must purchase one M/L angular strut and one Adapter for Accessories in Primary Beam XL for each railing post.
Loft bed railing S, Railing S, 4-Tubes railing S and Panel railing S:
Compatible with S range mezzanines: No additional accessories are required.
Compatible with the M and L range mezzanines: To go ahead with the installation, you must purchase one M/L angular strut for each railing post. Please note that the height of the handrail is reduced.
Compatible with the mezzanine of the XL range: To go ahead with the installation, you must purchase one M/L post clamp and one Adapter for Accessories in Primary Beam XL for each handrail post. Please note that the height of the railing is reduced.
Railing M, 4-Tubes railing M and Panel railing M:
These are not compatible with S range mezzanines.
Compatible with the M and L range mezzanines: No additional accessories are required.
Compatible with the XL range mezzanines: To go ahead with the installation, you must purchase one Adapter for Accessories in Primary Beam XL for each railing post.
Railing with safety skirting board L and Public use railing L:
These are not compatible with S range mezzanines.
Compatible with the M and L range mezzanines: No additional accessories are required.
Compatible with the XL range mezzanines: To go ahead with the installation, you must purchase one Adapter for Accessories in Primary Beam XL for each railing post.
Railing with safety skirting board XL:
These are not compatible with S range mezzanines.
Compatible with the M, L and XL range mezzanines: No additional accessories are required.
All TecroStar railings are designed for installation on our mezzanines. The Railing with safety skirting board XL is the most recommended for installation on other surfaces.
Yes. This modification is on behalf of the customer. It is possible to cut the railing and reduce its height.
That depends. The railing kits are 2 meters long. You will have to calculate how many kits you need.
The handrails of the railing* and the stairs** are available in aluminium with the following finishes:
Silver anodized (without additional cost)
Black lacquered (additional cost)
Wooden effect (additional cost)
In all cases it is suitable for outdoor use.
* The handrail of the loft bed railing is made of beech plywood.
** The spiral stairs have necessarily high-density polyethylene (HDPE) handrails in black colour.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
This extension is added to a pre-installed loft bed railing to extend its length. Both products are compatible as they have the same dimensions. Made top quality steel and beech wood with a natural finish, ideal for those installations where a railing is required but height is reduced.
-17%
Metallic structure with wooden floor, without construction work or bricklaying. A large, strong, robust mezzanine that adapts to homes, businesses and offices. Can be combined with any Tecrostar stairs or accessories.
Reducing the measurements of the mezzanine, the load capacity increases. Not suitable for pallet-truck circulation due to the point load they trans.
Keeps metal parts free of fingerprints and dirt. Spray the product directly and rub the surface off with a clean cloth.
It is recommended for the cleaning and maintenance of stainless steel, painted steel, aluminum and other metals.
It´s a special cleaner for our beams.
It contains 500 ml.
Alternating tread stairs S have alternating tread steps, with adjustable height, to provide access between the two floors (the same max height as T8 mezzanine). They can be installed on any of the four sides, in parallel to the structure with a S landing or perpendicular to the mezzanine, as well as inside the mezzanine floor.
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
The ‘Z’ Stability Kit is a bracing system formed by several stabilizer bars that are placed in one of the sides of the mezzanine.
It is specially designed for those situations, in which the mezzanine cannot be attached to any wall or the pillars cannot be fixed to the existing floor.
The placement of this bracing kit, as well as the stability bars and the mezzanine fixations depend on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in this section.
Light your space elegantly with the LED Panel; a recessed lighting that is installed with magnets, without using special tools, to get a pleasant atmosphere anytime. This recessed lighting works like traditional lamps. Should you want to install several panels and control them with a single switch, you just need to connect them to the same electrical circuit.
The LED panel implies a great energy saving as it has a power of 40W and produces 3.000 Lumens of brilliance. Suitable for any beam disposition of Tecrostar mezzanines.
It is not compatible with the remote control.
The general access stairs S are adequate according to the regulations that lay down access and evacuation requirements with a great public concurrence, unlike other industrial or private stairs that are not as demanding.
These stairs are the suitable solution for the Tecrostar mezzanines belonging to the same range. It is adjustable in height and can be placed in different locations, thanks to its versatile upper anchor.
This extension is added to a pre-installed loft bed railing to extend its length. Both products are compatible as they have the same dimensions. Made top quality steel and beech wood with a natural finish, ideal for those installations where a railing is required but height is reduced.
The adjustable metal railing is a protection device. Its main advantage lies in the possibility of adjusting its height to the needs of each project by means of the telescopic system.
The extension is added to the initial low railing flank to get 2 extra meters length. You can keep on adding as many extensions as needed to cover the desired length. You can include the corner elbows of handrail to join 2 different sides of the mezzanine.
Its features are the exact same as the low railing. Easy to install on any Tecrostar mezzanine or platform without works.
This extension is added to a pre-installed loft bed railing to extend its length. Both products are compatible as they have the same dimensions. Made top quality steel and beech wood with a natural finish, ideal for those installations where a railing is required but height is reduced.
Muy bien
Muy bonita y fácil de montar, eso sí peligrosa si se pone una cama cerca, ya que queda muy baja y si la cama queda cerca puedes precipitarte. Mejor una barandilla más alta.
Bonne taille
Facile d’ installation et à la bonne taille .
Garde corps élégant et fonctionnel
Très bon
Muy satisfecho , totalmente recomendable.
Excelente producto, acabado perfecto.
Acabado genial cuidan hasta el último detalle lo que es de agradecer.
Barandilla
Yo la he utilizado para crear una cama alta, junto con el altillo y la escalera. Todo muy bien porque ahora está a la altura que la niñas quería. Puede estar debajo, con su escritorio
Rambarde
Une rambarde de petit format proposée avec du bois de qualité sérigraphié. Superbe et elle remplit parfaitement son usage!