The Safety Pallet Gate, also known as Anti-fall tilting...
En stockLeave your number, our team will contact you back shortly
Filters
Loading...
It consists of softwood (MDF) battens that are thin and light, with 50x15mm rectangular section and 2m length that allows an easy installation of any kind of false ceiling. The battens should be installed against the direction of the mezzanine beams and leave a gap between them of 0.5m. They should be fixed to the beams using the included self-drilling...
It is a telescopic bar to fix the mezzanine against the wall, when the structure is separated from the wall. The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.
2 union pieces of the circular handrails to the corners of the railing
This connector is used to adapt the accessories to the primary beam of the Mezzanine XL 32. Thanks to this piece, the elements that are added to the mezzanine are fixed with greater solidity. The adapter can be used to include both the railing posts as well as to join the stairs and the stair landing to the primary beam. It is a Steel piece with a sleek...
Plywood board with tongue-and-groove joints in its four sides. It used as the bearing floor of Tecrostar mezzanines, installing it perpendicular to the secondary beams. Length: 2335 mmWidth: 610 mmThickness: 18 mm Calculate how many boards need. Introduce the dimensions in mm TP: Distance along the primary beams.TS: Distance along the secondary beams.
The S simple column is the same kind as featured in S mezzanines. It has only one supporting head in one flank for one S beam. It contains 2 telescopic pieces that compound the column, and the needed screws and anchorages.
The M Primary Beam consists of an interior beam and an exterior one. It features every needed screw. Minimum length: 225cm, maximun length: 415cm Beam height: 20cm
The S double column is the same kind as featured in S mezzanine but It has two supporting heads for two T8 beams. It contains 2 telescopic pieces that compound the column, and the needed screws and anchorages.
The M simple column is the same kind as featured in M mezzanines. It has only one supporting head in one flank for one M beam. It contains 2 telescopic pieces that compound the column, and the needed screws and anchorages.