




Reference: 73001-NA
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
Only when total amount exceeds 1000€ (TAX excl.).
Credit card, bank transfer, PayPal, check...
Our technical department will resolve your doubts from Monday to Friday from 7:00 to 15:00h.
Dispatched in 7 days. Check our delivery times in real time here.
Ask us about the waterproof option.
The "A" extension of the structure includes two simple columns adjustable in height, the same as those of the initial module, which are placed at the end of the extension module. It has the same length-adjustable beams, although with one less secondary beam, as the last one of the previous module is used. It also includes the load-bearing floor of structural boards to cover the new surface.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space, SL is not responsible of the use or inadequate installation of the product.
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
Yes. They have the exact same specifications as the initial structure.
Yes, you can add an extension to an existing mezzanine. You do not need to buy both structures at the same time.
No, the extension cannot be integrated and share columns. However, structures can be placed side by side and achieve continuity of the floor but you will not save any columns and there will be two columns together at the joints.
To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accidents.
When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.
You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)
You can find all the tools required to assemble it and tested by Tecrostar in the tools section.
All the models are installed by following these steps:
Pre-assemble the structure on the floor in the desired area.
Raise the outer structure to the desired height
Finish assembling the structure and floor.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.
TS8 Mezzanine: 3 hours with 2 people
TM15 Mezzanine: 4 hours with 2 people
TL30 Mezzanine: 5 hours with 3 people
The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
Depending on your order you can receive different packages: One box for the mezzanines of the S and M ranges or two boxes for L mezzanines.
Length: 239 cm
Width: 112 cm
Height: 54 cm
The stairs can share the box with the mezzanines if they are purchased at the same time or you can have a separate box for the stairs. Check the stairs section.
No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.
Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support. If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.
There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.
The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).
We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
-10%
This metallic and removable mezzanine allows the storage of heavy loads (for example, pallets up to 500 kg, racks, stackers, safety gates and more useful elements) and enables the movement of hand pallet trucks on it. Its assembly is easy and there is no need of works.
Learn more about our innovative industrial range.
-5%
The extension module "B" allows the extension of the mezzanine in the direction of the secondary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
The Stability Brace XL is an inclined bar that is placed in a column of the Mezzanines XL. It ensures the lateral stability in a determined side and direction.
It consists of a telescopic extensible bar that is joint to the column in its upper side. The bar is fixed to the floor at a distance of 1,3 metres from the column base plate removing, this way, the movement of the mezzanine in the side where it is installed.
This connector is used to adapt the accessories to the primary beam of the Mezzanine XL. Thanks to this piece, the elements that are added to the mezzanine are fixed with greater solidity. The adapter can be used to include both the railing posts as well as to join the stairs and the stair landing to the primary beam.
The Stability Brace XL is an inclined bar that is placed in a column of the Mezzanines XL. It ensures the lateral stability in a determined side and direction.
It consists of a telescopic extensible bar that is joint to the column in its upper side. The bar is fixed to the floor at a distance of 1,3 metres from the column base plate removing, this way, the movement of the mezzanine in the side where it is installed.
The Safety Pallet Gate, also known as Anti-fall tilting barrier, is a collective security and protection element. Its use is mandatory according to the labour risk prevention regulations. It avoids the people falling while lifting loads to a mezzanine or to any other level.
It works as a rocker: the merchandise is deposited in a position using a forklift and taken away in the other position from inside the mezzanine. This way, one of the railing sides is always closed, avoiding falling to a different level with no need to use harness.
The dimensions of the maximum load to deposit and the dimensions of the gate itself depend on the model, as shown in the main image.
Do you need a special width? Contact us if you need a safety pallet gate with customized width.
-10%
This metallic and removable mezzanine allows the storage of heavy loads (for example, pallets up to 500 kg, racks, stackers, safety gates and more useful elements) and enables the movement of hand pallet trucks on it. Its assembly is easy and there is no need of works.
Learn more about our innovative industrial range.
It consists of 50 domed blanking plugs made of plastic to plug unused holes in the beams of the mezzanine. They snap into the holes easily providing a snug fit. Domed blanking plugs are available in black or white.
This extra piece allows to increase the standard flight of the board from 10cm to 30cm. It is used for cases where the loft is far from the wall and we want the board to reach it, in order to make the most of the space and finish the wood against the wall. This piece is fixed to the wall.
Extension that can be added to lengthen the S 4 Tubes Railing. Both products have compatible dimensions. This modular railing is very resistant and easy to install. Manufactured with top-quality materials, it is a perfect accessory for domestic use which, thanks to its four horizontal tubes, provides greater safety.
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
-5%
The extension module "A" allows the extension of the mezzanine in the direction of the primary beams, without the need to dismantle the existing mezzanine.
The extension modules have very similar load capacity, dimensions and usable area to those of the initial module.
-5%
The Mezzanine TXL20 is specially designed for an industrial use, allowing to stock heavy loads. You can acquire it without waiting for quotes, measurements or technical drawings.
Learn more about our innovative industrial range.
It is a telescopic bar to fix the mezzanine against the wall, when the structure is separated from the wall.
Light your space elegantly with the LED Panel; a recessed lighting that is installed with magnets, without using special tools, to get a pleasant atmosphere anytime. This recessed lighting works like traditional lamps. Should you want to install several panels and control them with a single switch, you just need to connect them to the same electrical circuit.
The LED panel implies a great energy saving as it has a power of 40W and produces 3.000 Lumens of brilliance. Suitable for any beam disposition of Tecrostar mezzanines.
It is not compatible with the remote control.
Tecrostar wants to make assembling your mezzanine lighting system easy. With the 5 m power supply kit for one lamp, you can safely install any lighting system without needing any tools or knowledge of electricity in just five minutes.
The power supply kit is designed to generate an electrical circuit for one lamp. If you want to install more lamps you will need an extension kit for every additional light source you wish to install.
-17%
'The biggest mezzanine', that's how TL 35 is defined. This is the Tecrostar product that can develop more surface: 35m². This metallic mezzanine and wooden floors, but could also be used in homes. The TL 35 can be adjusted in all three dimensions (length, height and width). Like the other types of mezzanine, the structure TL 35 permits various combinations of stairs and accessories.
Load capacity from 200 kg per square meter considering the maximum dimensions of the mezzanine. Reducing the measurements of the mezzanine, the load capacity increases. Not suitable for pallet-truck circulation due to the point load they trans.
Metallic railing with aluminium handrails, designed to be used in a side of the folding stairs to wall, for both the 45º and 54º models.
It is installed in the side that is not flush against wall.
The wooden ladder S is made of high quality beech wood giving a natural look while protecting the wood's surface. The incline of the ladder is 80º. It is compatible with S range. The ladder is adjustable in height. When the height of the structure is equal to or less than 233cm, the ladder can be easily adapted cutting their stringpieces along the marks they include. The ladder can be installed on either side of the structure, or even install it inside the structure.
This ladder is ideal for places with little space where you need to take advantage of the underpass. Besides being folded in the upper side of the mezzanine, it allows an extra movement to leave the ladder horizontally to the structure so that the space underneath the mezzanine is totally free.
This kit includes everything needed to apply a varnish treatment to the floor of your mezzanines. Get a natural, soft, long-lasting and easy to clean finish. The kit includes enough product to varnish a surface of 5 sqm (2 layers). If the surface of your mezzanine is bigger, you will have to add to your order as many additional cans as needed. The varnish is also suitable for the wooden steps of the stairs or for the boat ladder.
Modular railing 200 cm long and 110 cm tall that includes posts with base plate to install it over several flooring types.