STRAIGHT STAIRS / SPIRAL STAIRS / VERTICAL STAIRS / BOAT LADDER / LATERAL STAIRS / STRAIGHT STAIRS / JAPANESE / TRUCKLE BED / ALTERNATING TREAD STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / PUBLIC ACCESS / GENERAL ACCESS /
Height: From 235cm to 381cm
SURFACE: From 7m2 to 37m2
Height: From 235cm to 381cm
Surface: From 7m2 to 37m2
* All stairs can be installed outside our mezzanines.
STANDARD / 4 TUBES / PANEL / ROPES / EXTENSIONS
PUBLIC ACCESS / SAFETY SKIRTING BOARD / WITH PLATE / SLAT RAILING WITH PLATE / EXTENSIONS /
LOFT BED / LOW
SAFETY PALLET GATE / DOUBLE-HINGED GATE / DOUBLE-HINGED GATE WITH SAFETY ZONE
LATERAL STAIRS / FOLDING STAIRS TO WALL
* All railings can be installed outside our mezzanines
Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.
Reference: A281
Varnish for TECROSTAR flooring boards. Get a natural, soft, long-lasting and easy to clean finish.
It includes enough product to varnish a surface of 2,5 sqm (2 layers). If the surface of your mezzanine is bigger, you will have to add to your order as many additional cans as needed.
The varnish is also suitable for the wooden steps of the stairs or for the boat ladder.
0.5L of wood matte varnish (2,5 sqm, 2 layers). Specific for TECROSTAR flooring boards.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.
You can make aesthetic modifications, but any structural modification non approved by Tecrostar will be under customer’s responsibility.
Yes, they are. Unless otherwise specified in the accesory description.
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with Tecrostar.
Tecrostar can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
Plywood board with tongue-and-groove joints in its four sides. It used as the bearing floor of Tecrostar mezzanines, installing it perpendicular to the secondary beams.
-40%
Vinyl planks adhesive floor finishing. The sticker side makes easier lay them over the wooden flooring on Tecrostar mezzanines.
-25%
Keeps metal parts free of fingerprints and dirt. Spray the product directly and rub the surface off with a clean cloth.
It is recommended for the cleaning and maintenance of stainless steel, painted steel, aluminum and other metals.
It´s a special cleaner for our beams.
It contains 500 ml.
It consists of 50 curved bolt caps made of plastic to cover the bolts and nuts of the mezzanine. They are easily placed and get well fixed.
This accessory helps you to cover the edges of your Tecrostar mezzanine flooring boards (S, M and L ranges) and contributes to improve the aesthetics of the structure. It is particularly indicated to cover the cuts of the perimeter boards, that may have irregularities in some occasions.
It consists of softwood (MDF) battens that are thin and light, with 50x15mm rectangular section and 2m length that allows an easy installation of any kind of false ceiling.
The battens should be installed against the direction of the mezzanine beams and leave a gap between them of 0.5m. They should be fixed to the beams using the included self-drilling screws. Sometimes the battens may need to be cut with a saw to fit the dimensions of the mezzanine.
It consists of 50 domed blanking plugs made of plastic to plug unused holes in the beams of the mezzanine. They snap into the holes easily providing a snug fit. Domed blanking plugs are available in black or white.
50 screws and 50 nuts to install in the holes without using the beams. These screws and nuts are decorative.
2 union pieces of the circular handrails to the corners of the railing
-40%
Vinyl planks adhesive floor finishing. The sticker side makes easier lay them over the wooden flooring on Tecrostar mezzanines.
Varnish for TECROSTAR flooring boards. Get a natural, soft, long-lasting and easy to clean finish.
It includes enough product to varnish a surface of 2,5 sqm (2 layers). If the surface of your mezzanine is bigger, you will have to add to your order as many additional cans as needed.
